Turbo6FG Silver Donating Members 497 Member For: 15y 1m 20d Gender: Male Posted 14/10/10 02:49 AM Share Posted 14/10/10 02:49 AM I have the FG Nizpro cooler & the finish is quite good. I think the quality of the finish did go up quite a lot from the original BA ones.For me the looks of it are irrelevant anyway, it was the performance I was after. I just got mine in raw grey finish, I didn't want a big shiny thing which stuck out for every cop to see.XFT have tested it to about 750rwkw on their F6 so I know it works & can cope OK if I ever want more power. There is also a BA with Nizpro cooler, turbo & tuning which has run 9.4 @ 152mph.But yeah, I reckon PW & Nizpro would have to be the best at the moment. I would use either. Both have also got more competition going which is good because it encourages development of better products & we are not stuck in a rut/limited so much. Something to be thankful for I reckon. Link to comment https://www.fordxr6turbo.com/forum/topic/70963-which-cooler-to-get/page/4/#findComment-1047542 Share on other sites More sharing options...
DUS12 Member 471 Member For: 17y 9m 17d Posted 14/10/10 02:52 AM Share Posted 14/10/10 02:52 AM yea for sure, I started off with a pwr cooler myself, but one major thing I have learnt the hard way with this car is,,,POOR MAN PAYS TWICE. but %100 see where you are coming from, I agree their is other stuff out their that will do the job.......just wont look as good doing it hahaha Link to comment https://www.fordxr6turbo.com/forum/topic/70963-which-cooler-to-get/page/4/#findComment-1047544 Share on other sites More sharing options...
bradles024 Donating Members 1,145 Member For: 15y 5m 8d Gender: Male Posted 14/10/10 03:55 AM Share Posted 14/10/10 03:55 AM No mention of AVO coolers? No-one use these? Link to comment https://www.fordxr6turbo.com/forum/topic/70963-which-cooler-to-get/page/4/#findComment-1047558 Share on other sites More sharing options...
F0RCEDXR Member 44 Member For: 15y 8m 22d Posted 14/10/10 11:37 AM Share Posted 14/10/10 11:37 AM The front of 4DZILR might look alright with a proper cooler! Link to comment https://www.fordxr6turbo.com/forum/topic/70963-which-cooler-to-get/page/4/#findComment-1047697 Share on other sites More sharing options...
MILES Donating Members 103 Member For: 16y 11m 15d Gender: Male Location: Townsville Posted 19/10/10 08:43 AM Share Posted 19/10/10 08:43 AM Yeah, My nizpro cooler looks good nice finish, and the plenum turned out better than I thought it was gonna be. I was expecting a fairly ordinary finish with it but when it was installed it looked really good. Link to comment https://www.fordxr6turbo.com/forum/topic/70963-which-cooler-to-get/page/4/#findComment-1048872 Share on other sites More sharing options...
Anchor Member 270 Member For: 15y 1m 12d Gender: Male Location: Rockhampton Posted 19/10/10 11:24 PM Share Posted 19/10/10 11:24 PM Eh I went the Rapid V3 kit. Alright to fit, had to cut the RIO and bend some aircon lines. Also cut some plastic in random places. Decent quality kit, but make sure you get sent everything. 1/4 of mine was missing. No brackets, no plumb back hoses, etc etc. As for power, making 360rwkw atm on a factory BA bottom end. Inlet temps don't spike after multiple runs. Proved to be good at powercruise. Link to comment https://www.fordxr6turbo.com/forum/topic/70963-which-cooler-to-get/page/4/#findComment-1049010 Share on other sites More sharing options...
4DZILR Donating Members 713 Member For: 15y 2m 17d Gender: Male Location: Sydney - Brighton Le Sands Posted 19/10/10 11:54 PM Share Posted 19/10/10 11:54 PM (edited) On 14/10/2010 at 11:37 AM, F0RCEDXR said: The front of 4DZILR might look alright with a proper cooler! BOOOOOOOOOOOOOOOOOO!!!! Its called a budget! lol nahh to be honest, im considering on a process west at some stage in the future.. Edited 20/10/10 12:00 AM by 4DZILR Link to comment https://www.fordxr6turbo.com/forum/topic/70963-which-cooler-to-get/page/4/#findComment-1049013 Share on other sites More sharing options...
our06t Mmmmm......BOOST Member 3,135 Member For: 17y 11m 25d Gender: Male Location: central coast Posted 20/10/10 01:17 AM Share Posted 20/10/10 01:17 AM for consistency had 4 dyno runs all within .3 of a kw, using PW stg1 kit and the one on my last car was the same, less than 1kw variance in runs. Link to comment https://www.fordxr6turbo.com/forum/topic/70963-which-cooler-to-get/page/4/#findComment-1049024 Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 18y 8m 1d Gender: Male Location: Melbourne, VIC Posted 20/10/10 08:51 AM Share Posted 20/10/10 08:51 AM I read somewhere that the PW stage 1 was better than the Stage 2, because of the crossflow, much like the Nizzy ones... Dunno where I heard that but.. Backs up our06t's post... I remember my lil wig cooler on back to back runs lol shocking... Link to comment https://www.fordxr6turbo.com/forum/topic/70963-which-cooler-to-get/page/4/#findComment-1049147 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now