Bent Intake Side Blade

[Brendan XR6-T]

  On 06/10/2010 at 11:16 AM, DjGsTa said:

Would a piece of rubber really make one of the blades bend though? Sounds abit weird to me

I cant think of anything else that could have done it except it could have sucked some other junk in there, they'd be a gr8 vacuum cleaner. I'll never really know until I pull everything apart it's gunna be a bitch to find.

Ive attached a pic anyway just to remind us wat happens when we let'em go for a while.

[Redback]

Mate a new wheel shouldn't cost more than about $ 200 plus fitting and balancing. Cheap if you pull the turbo off and take it down. Try Precision Turbochargers in Wetherill Park Sydney.

[xr_velocity]

I am getting a new Billet turbo cartridge with ceramic bearings for just under $1000. It pays to know someone who works at an auto store.

Just a front wheel will cost you bugger all as long as you take the turbo off yourself. Try GCG in Condell Park, factor in new studs and gaskets as well, you will need them. Don't reuse your studs, they will come loose.

[Brendan XR6-T]

  On 06/10/2010 at 6:49 PM, Redback said:

Mate a new wheel shouldn't cost more than about $ 200 plus fitting and balancing. Cheap if you pull the turbo off and take it down. Try Precision Turbochargers in Wetherill Park Sydney.

  On 06/10/2010 at 11:01 PM, xr_velocity said:

I am getting a new Billet turbo cartridge with ceramic bearings for just under $1000. It pays to know someone who works at an auto store.

Just a front wheel will cost you bugger all as long as you take the turbo off yourself. Try GCG in Condell Park, factor in new studs and gaskets as well, you will need them. Don't reuse your studs, they will come loose.

that's some helpful info cheers fellas I'll try'em out tomorrow.

Thanks Brendan

[arronm]

Call GCG they will sort you out