O Trader Member 89 Member For: 16y 3m 25d Posted 26/09/10 09:11 PM Share Posted 26/09/10 09:11 PM Does anyone know if the inlet opening of the FG XR8 snorkle (right hand side of photo) fits correctly on the plastic shroud and under the bonnet of the FG XR6 when its closed with squashing anything or does it need to be cut and tweaked ? Link to comment Share on other sites More sharing options...
Dyno Junkie Member 254 Member For: 17y 10m 22d Gender: Male Location: Ascot, Western Australia Posted 26/09/10 10:24 PM Share Posted 26/09/10 10:24 PM The XR8 airbox and snorkle fit, with a little bit of trimming.The opening of the XR8 snorkle is designed to fit an XR8 bonnet, as such the leading edge needs to be trimmed back.Also don't forget to drill two new holes in the bonnet underside and move the rubber seal back so that it doesn't block the new larger snorkle opening. Link to comment Share on other sites More sharing options...
Rancidpunx Brisbanes Resident Detailer Donating Members 950 Member For: 16y 19d Gender: Male Location: In my Cabin Outside Brisbane. Posted 27/09/10 02:41 AM Share Posted 27/09/10 02:41 AM The fit with the shroud is not perfect and does sit a little wonky because of the cold side piping. I got a little strip of carpet wedged under the airbox to lift it up and give a bit of clearance between the snorkle and cold side piping, also makes for a good fit with the shroud. Link to comment Share on other sites More sharing options...
Rusty XR6T Donating Members 516 Member For: 14y 10m 8d Gender: Male Posted 27/09/10 03:28 AM Share Posted 27/09/10 03:28 AM I got mine from ebay (the guys who took that pics you have) and it comes precut.fitment was perfect, took around 10 mins Link to comment Share on other sites More sharing options...
AJ-80 Member 97 Member For: 14y 4m 20d Posted 27/09/10 04:17 AM Share Posted 27/09/10 04:17 AM Anyone got a link to where I can buy one?Thanks. Link to comment Share on other sites More sharing options...
sten Member 45 Member For: 14y 8m Posted 29/09/10 10:08 AM Share Posted 29/09/10 10:08 AM Anyone have a part number for just the snorklNot the airbox too. If it's long enough I want to use it with the plazmaman intake on rapids systems website. A little more air can't hurt. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now