Jump to content

Recommended Posts

  • Member
  • Member For: 15y 3m 19d
  • Gender: Male
  • Location: Townsville

Ok , just looking at getting some feedback on what people are using in the way of the bigger style intercoolers (500x400x90) people thoughts as in value for money performance , looks etc on the P/W stage 3 , Rapids core and Plazaman 1000hp core .

im aiming at 360rwkw's any thing more is going to be a bonus.

Thanks in advance.

Link to comment
https://www.fordxr6turbo.com/forum/topic/70671-bigger-style-coolers/
Share on other sites

  • A much better forum
  • Silver Donating Members
  • Member For: 16y 10m 9d
  • Gender: Male
  • Location: Victoria

All good units... Rapids cheapest but probably least efficient of the three.... With 4 inch good for the power you want... Also requires cutting...

Process West are as good a quality as you can get and also site sponsors...

Plazmaman very good and look sh*t hot too!

I would go PW (and have!)

  • Member
  • Member For: 16y 9m 11d

if you'd be happy with 360kw you might find a stage 2 PW cooler will do enough for you. My goal is about that and I'm looking at a stage 2.3, to go consistently above 360-370 they usually recommend a 4" intake not the under battery one

  • Three pedals are better then two..
  • Donating Members
  • Member For: 18y 6d
  • Gender: Male
  • Location: Melbourne
  On 22/09/2010 at 2:03 AM, Worm said:

but probably least efficient of the three....

Got some proof of that?

Ando do some research in the Rapidsytems, Process West and HDI sub forums and see what you think. All supply good coolers with proven track records for the power your after.

  • Member
  • Member For: 15y 3m 19d
  • Gender: Male
  • Location: Townsville
  On 22/09/2010 at 3:43 PM, F6R said:

Without Doubt, go the BIG Process West, but dont expect it to fit without some choppy chop.

HAHAHAHA nice , how much choppy chop are we talken about here LOL , I am a fan of P/W's products hey

I have there plenum on my ute , I can get a rapid cooler brand new pretty cheap , so I thought it would be worth asking whats everyones opinions of the 3 most popular brands .

  • Legendary member!!
  • Donating Members
  • Member For: 18y 4m 10d
  • Gender: Male
  • Location: Dianella, West Oz

I use a Plazmaman 1000hp cooler and im pretty happy with it!

No complaints here...

Plazmaman, Process West, RAP1D and the Nizpro coolers are probably the most commonly used and proven round here.

  • Member
  • Member For: 15y 3m 19d
  • Gender: Male
  • Location: Townsville
  On 23/09/2010 at 6:29 AM, xcopbf said:

:stupid: go the MONZA? lol

:buttrock:

that's what im upgrading from , the old M-spec monza , managed 320rwkw's with it , but the NQ weather gets a bit warm so hence the upgrade , anyways decided to order the stage 3 process west cooler , hot&cold side piping to suit the P/W plenum , 4 inch race box and surge tank and fuel pump !

then should be seeing some decent numbers after a good tune !

kit rocks up monday :spoton: cant wait to hook it all up :w00t2:

  • Legendary member!!
  • Donating Members
  • Member For: 18y 4m 10d
  • Gender: Male
  • Location: Dianella, West Oz

Haha, awesome!

Should go alright afterward...

Sounds like your not doing it by halves.

Good on ya though - must have cost a pretty penny...?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'