Jump to content

Helppppp


ferret

Recommended Posts

  • Member
  • Member For: 15y 9m 7d
  • Gender: Male
  • Location: blacktown

having a bit of a problem I have no boost down low gets to about 4-5 k rpm then finally come on but onli 2 psi.. have had it scanned no trouble codes and have changed fuel and put octane booster but still nothing... any help..thx guys

Link to comment
Share on other sites

  • Legendary member!!
  • Donating Members
  • Member For: 17y 10m 10d
  • Gender: Male
  • Location: Dianella, West Oz

Has to be a leak somewhere...?

If using the stock crossover, maybe the turbo inlet pipe has come loose, but then you would hear it - lots of turbo spool...

Sticky wastegate / actuator?

Link to comment
Share on other sites

  • Member
  • Member For: 15y 9m 7d
  • Gender: Male
  • Location: blacktown

done that already this morning they couldnt find anything he scanned it and took it for a run. ive just pulled the intercooler pipeing all off everything seems 2 be alright

Link to comment
Share on other sites

  • Donating Members
  • Member For: 21y 2m 28d
  • Gender: Male
  • Location: Townsville

Wastegate flapper is possibly stuck open if its not boost leak. RAY076 had the same problem, we guessed it was grabbing on the xforce dump pipe.

Test by removing the hose hose from the actuator to boost solenoid and see if boost is back again then our final step was to use some wire wrapped around the flapper arm to hold it shut regardless of the situation as boost was lazy with this turbo that was bought second hand and ported and flowed.

Wired shut it was still fairly lazy so assume the porting has gone to far and is leaking through the flapper!

This turbo was modified by a well known tuner also!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'