poita85 Donating Members 43 Member For: 17y 2m 20d Gender: Male Location: Wodonga, VIC Posted 06/09/10 02:25 AM Share Posted 06/09/10 02:25 AM Hey Everyone,Booked my car into Pitlane next week for a tune and injectors (can't wait!) and want to make sure my car is running spot on before it goes on the dyno. First question is what spark plugs should I be running as it will be tuned to ~10 psi?I have done the following / will do the following is there anything else I should do beforehand? Car is a 2003 BA XR6T with 65,000kms*changed oil + filter *serviced the K + N air filter*fuel filter has been changed around 20,000kms ago (but will most likely change it again)*change spark plugs*will get manifold / turbo bolts tightened*will get the auto serviced Link to comment Share on other sites More sharing options...
possum Donating Members 553 Member For: 15y 7m 2d Gender: Male Posted 06/09/10 03:10 AM Share Posted 06/09/10 03:10 AM (edited) sounds like a pretty good list mate, maybe clean the boost soleniod and throttle body depending on how many k's the car has doneEdit: id check all your intercooler hose clamps etc too Edited 06/09/10 03:11 AM by possum Link to comment Share on other sites More sharing options...
SuckSqueezeBangBlow ʎǝʞuoɯ ɹoıuǝs Donating Members 1,808 Member For: 16y 9d Gender: Male Posted 06/09/10 03:50 AM Share Posted 06/09/10 03:50 AM (edited) make sure you get the manifolds nipped up like you said!.8mm gapped spark plugs is the general consensus. I bought the pregapped NGK but a lot of people prefer to gap the original ones IIRC?obviously not crucial to your tune but when was your diff oil changed last? when I dropped mine at 26,000kms it was awful, I just did it again last week at 45,000kms and it was very clean still but thought I would do it anyway. something to consider if you are having a dirty weekend with your car. Edited 06/09/10 03:51 AM by JC807 Link to comment Share on other sites More sharing options...
poita85 Donating Members 43 Member For: 17y 2m 20d Gender: Male Location: Wodonga, VIC Posted 06/09/10 05:32 AM Author Share Posted 06/09/10 05:32 AM I would like to buy the plugs already gapped, but been looking on the NGK website and looking at plugs for the BF XR6T they are gapped to 0.9 with the part number - BKR6EIX-P. I couldn't find any listed that were gapped to 0.8, which ones should I be looking for? Throttle body clean and checking cooler hoses will be added to the list for the weekend too. Diff oil has been done fairly recently. Link to comment Share on other sites More sharing options...
Guest newl Guests Posted 06/09/10 05:55 AM Share Posted 06/09/10 05:55 AM NGK BKR6EIX should already be pre-gapped at .8. I've got a set in my F6 and didn't have to touch a thing (though I did measure just to be sure). Link to comment Share on other sites More sharing options...
poita85 Donating Members 43 Member For: 17y 2m 20d Gender: Male Location: Wodonga, VIC Posted 06/09/10 11:20 PM Author Share Posted 06/09/10 11:20 PM I found them listed on the super cheap website, thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now