Jump to content

Sending Turbo For Work...


icer

Recommended Posts

  • Replies 22
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

  • Donating Members
  • Member For: 15y 9m 9d
  • Gender: Male
  • Location: Toowoomba

ive done it a few times to my fg, I believe the fg's have a different manifold design the the b series, but it was easier to remove the manifold, as when putting it back together it is easier getting the turbo to manifold nuts done up tighter if its not sitting in the engine bay.

Link to comment
Share on other sites

  • Donating Members
  • Member For: 17y 4m 16d
  • Gender: Male
  • Location: south east suburbs

You only just got it tuned yet again, and your pulling the turbo off it, I thought u would of tried to hit the track again with this tune and good mt's, then modify the turbo and see the difference.

What exactly are u getting done to the std turbo.

Link to comment
Share on other sites

  • Banned
  • Member For: 15y 3m 24d
  • Gender: Male
  • Location: Aspendale, Vic.

im off the road for a month (no licence) so might as well do some work to it while its off :) And dont really want to share whats happening just as of yet.

Is there a write up somewhere I have missed, on how to remove the manifold + turbo in one piece?

Link to comment
Share on other sites

  • Donating Members
  • Member For: 15y 9m 9d
  • Gender: Male
  • Location: Toowoomba

just un-do all the following in order,

-The oil and coolant feed lines, the ones on the top of turbo, coolant will come out as it is lower than the header tank (remember to top up when your finished obviously)

-get underneath and un-do the oil return line from when it joins to the block (2 bolts), un-do the coolant return line aswell.

-Un-do the 2 little hose clamps comming from the turbo on the boost control hoses.

-Un-do the bolts or nuts at the back of the turbo to the dump pipe.

-Un-do the bolts joining the manifold to the engine.

and that should be it, ya cant go wrong, the only thing that will leak is the coolant, which you just clean up and top up when your done.

oh and obviously you have to un-do the intake and intercooler pipe out of the turbo to start with too!

Edited by CAM860
Link to comment
Share on other sites

  • Donating Members
  • Member For: 17y 4m 16d
  • Gender: Male
  • Location: south east suburbs

im off the road for a month (no licence) so might as well do some work to it while its off :) And dont really want to share whats happening just as of yet.

Is there a write up somewhere I have missed, on how to remove the manifold + turbo in one piece?

Ah I see, well good luck on operation stealth then..lol

cough ...to4z internals haha

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
  • Create New...
'