nelsonian101 Donating Members 961 Member For: 16y 8m 12d Gender: Male Location: Sydney Posted 20/07/10 07:35 AM Share Posted 20/07/10 07:35 AM I am doing more track days in my FGXR6T with stickier tyres, but am starting to hold onto the wheel too much for support in corners which isn't good.Has anyone fitted race bucket seat to the FG?Were rail mods required? Link to comment Share on other sites More sharing options...
ZAP No boost, no bottle, just my foot on the throttle! Lifetime Members 7,935 Member For: 21y 23d Gender: Male Location: Sydney Posted 20/07/10 08:06 AM Share Posted 20/07/10 08:06 AM Your problem will be the side airbags and making the car unroadworthy.Try putting a 4 point harness in as it will make more difference than a bucket Link to comment Share on other sites More sharing options...
Guest Slash Guests Posted 20/07/10 01:07 PM Share Posted 20/07/10 01:07 PM 4point harness with no cage is very dangerous. In the event of a rollover, your head will have insufficient room to move & subsequently be crushed.Tocchi has fitted a Bride Zeta with minimal modifications to seat/rail. If you buy a second rail, you can just bolt/unbolt each seat before & after your track day Link to comment Share on other sites More sharing options...
nelsonian101 Donating Members 961 Member For: 16y 8m 12d Gender: Male Location: Sydney Posted 21/07/10 08:36 AM Author Share Posted 21/07/10 08:36 AM (edited) Any recommendations in Sydney for where I could buy one and get one fitted, street legal for the trip to and from the track. Edited 21/07/10 08:39 AM by RHR No need to quote above post. USE FAST REPLY Link to comment Share on other sites More sharing options...
gregor Member 459 Member For: 16y 6m 16d Posted 21/07/10 10:29 PM Share Posted 21/07/10 10:29 PM to be legal you'll probably have to get the car engineered with it installed. Depending on other mods that may not be so easy. Link to comment Share on other sites More sharing options...
RAP1D Member Donating Members 3,739 Member For: 18y 9m 18d Gender: Male Location: Sydney NSW Posted 22/07/10 01:14 AM Share Posted 22/07/10 01:14 AM Yes it would have to the engineered with the seat in, and all air bags opperating.For seats go to Revolution, they have a huge range. Link to comment Share on other sites More sharing options...
Tocchi Sandtrap Motorsport Donating Members 2,055 Member For: 16y 3m 13d Gender: Male Location: Perth Posted 22/07/10 01:53 AM Share Posted 22/07/10 01:53 AM All airbags wont be operational, as there are airbags in the side of the seat.heres a few photos that explain the install... sort of step by step.need:1x Pair of RPM seat rails (universal, low ones)4x bolts, to suit the 4 nuts that hold the factory seat on2x 1" length to add to rails to increase length to suit FG4x 10mm (whatever bolt is) holes for bolts. Link to comment Share on other sites More sharing options...
RAP1D Member Donating Members 3,739 Member For: 18y 9m 18d Gender: Male Location: Sydney NSW Posted 22/07/10 01:57 AM Share Posted 22/07/10 01:57 AM That looks cool mate... it looks high though? Link to comment Share on other sites More sharing options...
Tocchi Sandtrap Motorsport Donating Members 2,055 Member For: 16y 3m 13d Gender: Male Location: Perth Posted 22/07/10 03:01 AM Share Posted 22/07/10 03:01 AM yeah it does look high, but im sitting a decent 5cm lower at least.... id have to double check though, I know its lower, just cant remember how much...will let you know on friday night/ saturday morning when I put the seat in the ute for the speed event ... (XR8 broken so I gotta use the F6 haha)ideally, I want to get fixed brackets made, as you get a little bit of flex with my setup.its height adjustable on the sides Link to comment Share on other sites More sharing options...
Rosie Member 361 Member For: 17y 11m 1d Posted 23/07/10 05:06 AM Share Posted 23/07/10 05:06 AM Mine dropped me at lease an inch in the BA, on the 'lower' setting!- It's better though!The Factory seat was way to high when you put your Helmet on! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now