Jump to content

Fg Xr6T Brake Specs


PSI40T

Recommended Posts

  • Member
  • Member For: 16y 2m 13d
  • Gender: Male
  • Location: W.A.

Since I upgraded to 6 pot Brembos up front on my ute, I personally believe a waste of money. The extra money spent could have been used to repair it after turning the DSC switch off and losing control hitting a kerb.....Different story for my F6 with six pot front and 4 pot rear...I reckon the front/back brake bias(?) after upgrading is all wrong. I believe the Ford dealer who didn't have a problem selling the upgrade shouldn't have as something not right.

Link to comment
Share on other sites

  • Donating Members
  • Member For: 16y 4m 23d
  • Gender: Male
  • Location: Sydney

much difference with the rears changed?

My car is used at the circuit around 4 times a year, so once I had shagged my stock rear solid discs and pads I found a great price on the bigger rear ventilated set up. There is probably zero difference on the street but I want to keep rotor temps down as much as possible at the track. The solid rear discs also warped early. Possibly due to my adrenalin enhanced stupidity by pulling on the handbrake in the pits after a session during my early track days with the car! :)

Link to comment
Share on other sites

  • Donating Members
  • Member For: 16y 4m 23d
  • Gender: Male
  • Location: Sydney

Thanks for the info nelson. I havnt seen a FG turbo with those rear rotors yet.

That means they would be the same rear rotors as what is on the non turbo Falcons.

Can I ask what year and month build your FG is?

:bowdown:

My FGXR6T was one of the first out. I was one of the extra keen original idiots that waited ages for one on order and paid big $$!!. Think I placed an order around May 2008, got it end of July 2008. Has over 90,000kms on it now and couldn't be happier with the car.

Link to comment
Share on other sites

  • flame magnet
  • Gold Donating Members
  • Member For: 16y 6m 1d
  • Gender: Male
  • Location: adelaide hills- 'race air' central

the pbr premium kit for xr's was the same as fg xr6t. 328mm vented rears. I got that kit just about to go on... :bowdown:

Link to comment
Share on other sites

  • Donating Members
  • Member For: 16y 8m 14d
  • Gender: Male
  • Location: Blacktown!

no there not. The premium kit for the BA xr's only had 303mm solid rears. The kit you got off me, I got the 328mm vented rears seperate to the fronts. Plus the fronts are different too, 325mm(BA) to 322mm(FG) with different calipers

Edited by RHR
No need to quote above post. USE FAST REPLY
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'