Turbo Question

[zayd687]

hi Guys

when a your stock xr6 turbo blows or you wish to get a replacement, if its an aftermarket turbo do you have to get new braided lines for oil n water?

are there any turbos that would ultimately fit the standard lines?

[orangeute338]

if its the same cartridge then the lines will fit, but usually if you go bigger they have a larger middle section so fittings might be different sizes. you might be lucky and manage to fit up the lines. just get the hard line cut off near the turbo and get a braided hose put on bit cheaper then buying a long length of braided hose, altho the fittings is where all the money goes, if you go to pirtek with cash you can get it cheaper...