Kv! Donating Members 1,132 Member For: 15y 2m 2d Gender: Male Location: Eastern Suburbs, Melbourne Posted 31/08/10 03:30 AM Share Posted 31/08/10 03:30 AM Will the siemens dekas be good for around 320+rwkw in a fgt?Do they idle/flow well? They are quite cheap in terms of price Link to comment https://www.fordxr6turbo.com/forum/topic/69273-injectors-for-fg/page/3/#findComment-1036303 Share on other sites More sharing options...
HIRO F6 Member 1,817 Member For: 16y 2m 29d Gender: Male Location: Brisbane, QLD Posted 31/08/10 03:44 AM Share Posted 31/08/10 03:44 AM Yep, the DEKA'S will see 320rwkw's. I ran my DEKA'S in the FG to about 360rwkw's.They didnt idle as well as the XSPURT / ID range were able to but that's in the tuning and scaling side and could have been improved. Link to comment https://www.fordxr6turbo.com/forum/topic/69273-injectors-for-fg/page/3/#findComment-1036304 Share on other sites More sharing options...
Kv! Donating Members 1,132 Member For: 15y 2m 2d Gender: Male Location: Eastern Suburbs, Melbourne Posted 31/08/10 04:08 AM Share Posted 31/08/10 04:08 AM Thanks mate, How much are the xspurts? And are they a direct fit ? Link to comment https://www.fordxr6turbo.com/forum/topic/69273-injectors-for-fg/page/3/#findComment-1036316 Share on other sites More sharing options...
HIRO F6 Member 1,817 Member For: 16y 2m 29d Gender: Male Location: Brisbane, QLD Posted 31/08/10 04:28 AM Share Posted 31/08/10 04:28 AM RRP is $155 each. They come with the harness adapter plug and an extension if they are for a BA / BF. They are a direct fit into the FG fuel rail. Link to comment https://www.fordxr6turbo.com/forum/topic/69273-injectors-for-fg/page/3/#findComment-1036327 Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 9m 10d Gender: Male Location: OZ Posted 31/08/10 05:50 AM Share Posted 31/08/10 05:50 AM (edited) I don't think ID's and XSPURTS should be put in the same sentance. They are not the same and these XSPURT things are still a mystery......I am yet to see any decent details on these. I can get onto the Injector Dynamics website and get a full run down and then order a set from the US for $820 delivered ready to fit. Forgive me for being a *beep*, but these xspurts need to be marketed with decent supporting facts for them to sell.*Edit* from what I hear they are a great injector.....but whoever wholesales these things, provide the world with the info and confodence they're looking for! Edited 31/08/10 05:52 AM by IH8TOADS Link to comment https://www.fordxr6turbo.com/forum/topic/69273-injectors-for-fg/page/3/#findComment-1036348 Share on other sites More sharing options...
Paul@eliteauto Member 843 Member For: 18y 7m 18d Gender: Male Location: Brisbane Posted 31/08/10 06:06 AM Share Posted 31/08/10 06:06 AM I have high flowed my own car as a test mule.Makes 360 rwkw on pump fuel everyday.Drove it from Brisbane to Wagga average fuel consumption 8.9 l/100km.Makes 400 rwkw on race fuel and runs 10s . Idles perfecty. Works for me.Cheers Paul Link to comment https://www.fordxr6turbo.com/forum/topic/69273-injectors-for-fg/page/3/#findComment-1036349 Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 10m 23d Gender: Male Location: Melbourne Posted 31/08/10 06:13 AM Share Posted 31/08/10 06:13 AM Whats a high flow set you back? As a comparison. Link to comment https://www.fordxr6turbo.com/forum/topic/69273-injectors-for-fg/page/3/#findComment-1036351 Share on other sites More sharing options...
Kv! Donating Members 1,132 Member For: 15y 2m 2d Gender: Male Location: Eastern Suburbs, Melbourne Posted 31/08/10 06:41 AM Share Posted 31/08/10 06:41 AM Copied this off tuffcarparts thread on another forum:Bosch EV14 52lb, 60lb, 73lb, 90lb - $77ea – Suitable for FG, LS1-9 and anywhere else EV1 and EV6 injectors will fit (such as BA-BF XR6T) with wiring adapters and spacers which we sell.Other than the wiring adapters (which are supplied) these are a 3/4 length, straight fit injector with no other mods required (other than tune of course!)How are these on the fgs ? Link to comment https://www.fordxr6turbo.com/forum/topic/69273-injectors-for-fg/page/3/#findComment-1036356 Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 9m 10d Gender: Male Location: OZ Posted 31/08/10 06:45 AM Share Posted 31/08/10 06:45 AM Bit of a mystery with the high flowed stockies too. Are they done inhouse? What is the process....Jig & Drill? New director plate? I've heard conflicting stories with the drilled hi-flowed stockies. Again I know these work well, but mystery products hardly fill the consumer with confidence. Link to comment https://www.fordxr6turbo.com/forum/topic/69273-injectors-for-fg/page/3/#findComment-1036357 Share on other sites More sharing options...
riki83 Silver Donating Members 384 Member For: 15y 2m Gender: Male Location: Kellyville, Sydney Posted 31/08/10 06:45 AM Share Posted 31/08/10 06:45 AM I will have my injectors up for sale shortly, they are drilled and am going the id. Pm me for prior interest Link to comment https://www.fordxr6turbo.com/forum/topic/69273-injectors-for-fg/page/3/#findComment-1036358 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now