Kv! Donating Members 1,132 Member For: 14y 11m Gender: Male Location: Eastern Suburbs, Melbourne Posted 31/08/10 03:30 AM Share Posted 31/08/10 03:30 AM Will the siemens dekas be good for around 320+rwkw in a fgt?Do they idle/flow well? They are quite cheap in terms of price Link to comment Share on other sites More sharing options...
HIRO F6 Member 1,817 Member For: 15y 11m 27d Gender: Male Location: Brisbane, QLD Posted 31/08/10 03:44 AM Share Posted 31/08/10 03:44 AM Yep, the DEKA'S will see 320rwkw's. I ran my DEKA'S in the FG to about 360rwkw's.They didnt idle as well as the XSPURT / ID range were able to but that's in the tuning and scaling side and could have been improved. Link to comment Share on other sites More sharing options...
Kv! Donating Members 1,132 Member For: 14y 11m Gender: Male Location: Eastern Suburbs, Melbourne Posted 31/08/10 04:08 AM Share Posted 31/08/10 04:08 AM Thanks mate, How much are the xspurts? And are they a direct fit ? Link to comment Share on other sites More sharing options...
HIRO F6 Member 1,817 Member For: 15y 11m 27d Gender: Male Location: Brisbane, QLD Posted 31/08/10 04:28 AM Share Posted 31/08/10 04:28 AM RRP is $155 each. They come with the harness adapter plug and an extension if they are for a BA / BF. They are a direct fit into the FG fuel rail. Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 6m 8d Gender: Male Location: OZ Posted 31/08/10 05:50 AM Share Posted 31/08/10 05:50 AM (edited) I don't think ID's and XSPURTS should be put in the same sentance. They are not the same and these XSPURT things are still a mystery......I am yet to see any decent details on these. I can get onto the Injector Dynamics website and get a full run down and then order a set from the US for $820 delivered ready to fit. Forgive me for being a *beep*, but these xspurts need to be marketed with decent supporting facts for them to sell.*Edit* from what I hear they are a great injector.....but whoever wholesales these things, provide the world with the info and confodence they're looking for! Edited 31/08/10 05:52 AM by IH8TOADS Link to comment Share on other sites More sharing options...
Paul@eliteauto Member 843 Member For: 18y 4m 16d Gender: Male Location: Brisbane Posted 31/08/10 06:06 AM Share Posted 31/08/10 06:06 AM I have high flowed my own car as a test mule.Makes 360 rwkw on pump fuel everyday.Drove it from Brisbane to Wagga average fuel consumption 8.9 l/100km.Makes 400 rwkw on race fuel and runs 10s . Idles perfecty. Works for me.Cheers Paul Link to comment Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 7m 21d Gender: Male Location: Melbourne Posted 31/08/10 06:13 AM Share Posted 31/08/10 06:13 AM Whats a high flow set you back? As a comparison. Link to comment Share on other sites More sharing options...
Kv! Donating Members 1,132 Member For: 14y 11m Gender: Male Location: Eastern Suburbs, Melbourne Posted 31/08/10 06:41 AM Share Posted 31/08/10 06:41 AM Copied this off tuffcarparts thread on another forum:Bosch EV14 52lb, 60lb, 73lb, 90lb - $77ea – Suitable for FG, LS1-9 and anywhere else EV1 and EV6 injectors will fit (such as BA-BF XR6T) with wiring adapters and spacers which we sell.Other than the wiring adapters (which are supplied) these are a 3/4 length, straight fit injector with no other mods required (other than tune of course!)How are these on the fgs ? Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 6m 8d Gender: Male Location: OZ Posted 31/08/10 06:45 AM Share Posted 31/08/10 06:45 AM Bit of a mystery with the high flowed stockies too. Are they done inhouse? What is the process....Jig & Drill? New director plate? I've heard conflicting stories with the drilled hi-flowed stockies. Again I know these work well, but mystery products hardly fill the consumer with confidence. Link to comment Share on other sites More sharing options...
riki83 Silver Donating Members 384 Member For: 14y 10m 29d Gender: Male Location: Kellyville, Sydney Posted 31/08/10 06:45 AM Share Posted 31/08/10 06:45 AM I will have my injectors up for sale shortly, they are drilled and am going the id. Pm me for prior interest Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now