T6EGO Donating Members 91 Member For: 14y 10m 6d Gender: Male Posted 04/07/10 12:40 PM Share Posted 04/07/10 12:40 PM Hey guys insure this question has been answered before somewhere just can't seem to find it. I have a bf mk II an was wondering if I'm aiming for about 300rwkw am I going to need valve springs replaced or just injectors. I know earlier ba's have the weaker valve springs but not sure if the bf can do with 300 rwkw. Thanks Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 3m 13d Gender: Male Location: Probably above atmospheric pressure Posted 04/07/10 01:00 PM Share Posted 04/07/10 01:00 PM Valve springs should be fine. I'm not planning on doing mine and am aiming for low 300's. Link to comment Share on other sites More sharing options...
icer Banned 2,335 Member For: 15y 7m 20d Gender: Male Location: Aspendale, Vic. Posted 04/07/10 01:10 PM Share Posted 04/07/10 01:10 PM plenty of 06/06+ motors running stock valve springs over 400rwkw. Im on 350+ with standard v/springs in my 07 motor no problems. Link to comment Share on other sites More sharing options...
T6EGO Donating Members 91 Member For: 14y 10m 6d Gender: Male Posted 04/07/10 01:19 PM Author Share Posted 04/07/10 01:19 PM I was thinking they would be safe too, only thought otherwise because the guys from Jim mock racing said it would be a waste of time if I did only injectors so was getting mixed answers. But if you guys are running with stock springs then I don't see the problem. Link to comment Share on other sites More sharing options...
HIRO F6 Member 1,817 Member For: 16y 1m 17d Gender: Male Location: Brisbane, QLD Posted 04/07/10 09:29 PM Share Posted 04/07/10 09:29 PM Do you pay for insurance and never have a crash?Same thing with valve springs. You may not need them but your better of having them then not. Link to comment Share on other sites More sharing options...
XYZ Donating Members 1,171 Member For: 15y 5m 20d Posted 05/07/10 12:58 AM Share Posted 05/07/10 12:58 AM Yep, I agree with Karl. Take it from someone who has learnt the hard way... Link to comment Share on other sites More sharing options...
T6EGO Donating Members 91 Member For: 14y 10m 6d Gender: Male Posted 05/07/10 01:08 AM Author Share Posted 05/07/10 01:08 AM Hmm looks like back to sitting on the fence for me. Lol. Just out of curiosity how much am I looking at ovchange valve springs with injectors? And any recommendations where to do it in Melbourne?? Thanks Link to comment Share on other sites More sharing options...
icer Banned 2,335 Member For: 15y 7m 20d Gender: Male Location: Aspendale, Vic. Posted 05/07/10 02:24 AM Share Posted 05/07/10 02:24 AM pm sent Link to comment Share on other sites More sharing options...
HIRO F6 Member 1,817 Member For: 16y 1m 17d Gender: Male Location: Brisbane, QLD Posted 05/07/10 02:33 AM Share Posted 05/07/10 02:33 AM Cmon *Beep*, not like you to talk behind the scene! Link to comment Share on other sites More sharing options...
Buf-Phoon loitering with intent Lifetime Members 13,318 Member For: 21y 6m 18d Gender: Male Location: Zombie Birdhouse Posted 05/07/10 02:45 AM Share Posted 05/07/10 02:45 AM I think I will be doing mine soon in a BF Phoon. Tewantin to Cooroy rd yesterday with a full car ( luggage and passengers)flat 4th going into the cnr going up the hill flat changed 5th and started to get some valve float .Better to do them IMO. First sign of any issues for me, full car , full load , full throttle and a steep hill. Now where to get em done as I am not driving a 2000k round trip to CV ? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now