Sir20B Member 21 Member For: 15y 18d Gender: Male Location: Brisbane Posted 07/07/10 01:50 AM Share Posted 07/07/10 01:50 AM Just a tiny bit of grinding of the crash bar. I have a PW and heartliy reccomend it. Cool , does that mean there is gringing / cutting of the steel reo also? Woops forgot bout that bit. It's plastic I doubt it forms part of the overall crash rating. Mmm I guess Ford Engineers are the only people who can answer that. Id would be terrible to find out the hard way... ie up the back of a bus or something! Or if your insurance company rejected a claim. sir20B, does the PWR kit retain the factory mounting points? Any statistics to see how well each kit match up against each other? I guess when speaking to tuners, they would be fairly bias, as they would recommend the ones they stock... The PWR stepped unit retains all 4 yes.. I found this flyer on the PWR Site.. Your best referring to each reseller or manufacturer for individual tests results or performance graphs perhaps. There are graphs on the pwr site I see also... Performance wise it comes back to basics...A cooler that DOES require cutting of the car has a head start.. ie it is obviously larger compared to that of a cooler that obviously doesnt.. I guess its also a case of personal choice.. cheers Link to comment Share on other sites More sharing options...
bluprinturbo Donating Members 605 Member For: 16y 7m Gender: Male Location: brisbane Posted 07/07/10 03:25 AM Share Posted 07/07/10 03:25 AM you wouldnt know what these are worth at all sir20b? might go one of these. Link to comment Share on other sites More sharing options...
HIRO F6 Member 1,817 Member For: 15y 10m 22d Gender: Male Location: Brisbane, QLD Posted 07/07/10 03:34 AM Share Posted 07/07/10 03:34 AM Sir20B, do you not work for PWR? Link to comment Share on other sites More sharing options...
Sir20B Member 21 Member For: 15y 18d Gender: Male Location: Brisbane Posted 07/07/10 04:02 AM Share Posted 07/07/10 04:02 AM (edited) you wouldnt know what these are worth at all sir20b? might go one of these.I think 990inc. Best ring to confirm Sir20B, do you not work for PWR?No, but I have ran one of their data loggers on my car for last 4months (one of 2 cars to do so). Not biased, just keen to get the most bang for buck (like the rest of us) and stating it how it is...Id also be happy to test any intercooler that you can find, that will fit with zero mods to the stock front end of my FG... cheers Edited 07/07/10 04:08 AM by Sir20B Link to comment Share on other sites More sharing options...
Kv! Donating Members 1,132 Member For: 14y 9m 25d Gender: Male Location: Eastern Suburbs, Melbourne Posted 08/07/10 07:59 AM Share Posted 08/07/10 07:59 AM Thanks sir20b,Which piping kits do these work well with? Link to comment Share on other sites More sharing options...
HIRO F6 Member 1,817 Member For: 15y 10m 22d Gender: Male Location: Brisbane, QLD Posted 08/07/10 08:48 AM Share Posted 08/07/10 08:48 AM (edited) Apologies mate, I'd presumed the car in all the photo's and your avatar was Drew's car. Edited 08/07/10 08:51 AM by HIRO F6 Link to comment Share on other sites More sharing options...
Process West Member 248 Member For: 18y 6m 9d Gender: Male Location: Wollongong NSW Posted 10/07/10 02:18 AM Share Posted 10/07/10 02:18 AM (edited) I’m up for a back-to-back test of my FG intercooler product against this.I’ll even chop 100mm from the top of it so the plastic bridge doesn’t have to be removed.I can guarantee that my intercooler will still work better (have lower outlet temps)than ANY extruded tube and fin intercooler. I’ve back to back tested many cars over the last 12 years with extruded cores and they are simply not even close to an offset bar and plate core.Bring on an independent test.Kev Edited 10/07/10 02:19 AM by Process West Link to comment Share on other sites More sharing options...
riki83 Silver Donating Members 384 Member For: 14y 9m 23d Gender: Male Location: Kellyville, Sydney Posted 10/07/10 05:16 AM Share Posted 10/07/10 05:16 AM I love this!!! a cool off......I think you'll have it Kev Link to comment Share on other sites More sharing options...
Sir20B Member 21 Member For: 15y 18d Gender: Male Location: Brisbane Posted 10/07/10 07:51 AM Share Posted 10/07/10 07:51 AM (edited) I'm up for a back-to-back test of my FG intercooler product against this.I'll even chop 100mm from the top of it so the plastic bridge doesn't have to be removed.I can guarantee that my intercooler will still work better (have lower outlet temps)than ANY extruded tube and fin intercooler. I've back to back tested many cars over the last 12 years with extruded cores and they are simply not even close to an offset bar and plate core.Bring on an independent test.KevCool... (Literally)Send her up. Happy to test it for you.. Criteria will be a 3 Minute period at 75% load on Dyno with 60 km/h Dyno fan going flat out...Any Bar and plate cooler will "hold" the cold for longer on one pull and let time to recover due to it being heavier in construction than any T/F cooler ever made.A constant load period will be interesting with the flat faced natured front edge of the bar and plate cooler with 60km/h breeze blowing over it and not through it..PM me for address. Cheers Edited 10/07/10 07:57 AM by Sir20B Link to comment Share on other sites More sharing options...
Process West Member 248 Member For: 18y 6m 9d Gender: Male Location: Wollongong NSW Posted 10/07/10 08:09 AM Share Posted 10/07/10 08:09 AM (edited) Cool... (Literally)Send her up. Happy to test it for you.. Criteria will be a 3 Minute period at 75% load on Dyno with 60 km/h Dyno fan going flat out...Any Bar and plate cooler will "hold" the cold for longer on one pull and let time to recover due to it being heavier in construction than any T/F cooler ever made.A constant load period will be interesting with the flat faced natured front edge of the bar and plate cooler with 60km/h breeze blowing over it and not through it..PM me for address. CheersSo in a drag race situation (which is what 99% of the guys around here are into) the bar & plate is the best option??needs to be an unbiased test..You used to work for PWR for longer than I can remember ;-) Edited 10/07/10 08:15 AM by Process West Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now