dangreene Member 53 Member For: 17y 4m 3d Posted 03/06/11 12:32 PM Share Posted 03/06/11 12:32 PM hey guys I know im digging up a thread almost a year old but ive just myself a ba ute with a 40-94 on it and all the supporting mods but with a 2 speed glide.nizpro said the cooler is letting it down and could go with a 4" exhaust rather than 3.5" but I only ran up 326 @ 20psi........ do you thing the front mount and exhaust could be choking it that much?? Link to comment Share on other sites More sharing options...
xr6t_ute Donating Members 2,281 Member For: 17y 5m 4d Gender: Male Location: south east suburbs Posted 03/06/11 02:27 PM Share Posted 03/06/11 02:27 PM 3.5inch exhaust arnt too bad to support over 400, and also you cant compare power outputs to other guys running 4 speeds or 6speed autos as the glide and C series trans would have a much lower reading on the dyno. Link to comment Share on other sites More sharing options...
RIP_HSV HOON Member 1,636 Member For: 14y 8m 15d Gender: Male Location: W.A Posted 04/06/11 01:37 AM Share Posted 04/06/11 01:37 AM hey guys I know im digging up a thread almost a year old but ive just myself a ba ute with a 40-94 on it and all the supporting mods but with a 2 speed glide.nizpro said the cooler is letting it down and could go with a 4" exhaust rather than 3.5" but I only ran up 326 @ 20psi........ do you thing the front mount and exhaust could be choking it that much??Hey mate I have a 4094 with the small .85 rear housing it made 420something rwkw through a C4 and 3500rpm convertor, have upgraded to a larger 1.06 housing but isnt tuned yet it should see 450rwkws @22-24 psi and close to 500rwkws on E85 @ 26-28psi, sounds like there is another issue with your car, what size cat and dump pipe are you using? Are you using a Nizpro cooler should be good for 500rwkws..... Link to comment Share on other sites More sharing options...
dalts Member 755 Member For: 18y 6m 3d Gender: Male Location: brisbane Posted 04/06/11 02:14 AM Share Posted 04/06/11 02:14 AM it can be all in the convertor aswell,since getting my convertor fixed mine makes 385+ day in day out and that's with a slightly modded turbo!!I run the nizpro cooler 4" dump and 3.5" exhaust so those parts arent of concern!lee Link to comment Share on other sites More sharing options...
dangreene Member 53 Member For: 17y 4m 3d Posted 04/06/11 07:08 AM Share Posted 04/06/11 07:08 AM sounds like it could be converter or cooler.....its got a full aps system 4" dump 3.5" the rest of the way.......what cooler is recomended without breaking the budget like the nizpro would at roughly 2 grand? I only need core a all the piping is 3 inch Link to comment Share on other sites More sharing options...
The_Bogan Donating Members 881 Member For: 17y 7m 27d Gender: Male Location: Brisbane, Queensland Posted 08/06/11 11:22 PM Author Share Posted 08/06/11 11:22 PM process west is the way to go mate!!!intake temperatures when we were tuning my car did not rise above 35 degree's celcius in the intake manifold!! Link to comment Share on other sites More sharing options...
RIP_HSV HOON Member 1,636 Member For: 14y 8m 15d Gender: Male Location: W.A Posted 09/06/11 09:15 AM Share Posted 09/06/11 09:15 AM What size rear housing is on the 4094 Boges? Link to comment Share on other sites More sharing options...
XR64LT Donating Members 678 Member For: 16y 10m 22d Gender: Male Location: sydney Posted 10/06/11 09:54 AM Share Posted 10/06/11 09:54 AM Gotta love having a C4 coming on boost Link to comment Share on other sites More sharing options...
XRATEDXR6 Member 15 Member For: 13y 4m 20d Posted 29/07/11 01:19 PM Share Posted 29/07/11 01:19 PM What about conrods n Crap iv almost got the same setup on mine few more custom bits but my mechanic only suggested running 16 pound to save my rods.. how do they hold up under boost? Link to comment Share on other sites More sharing options...
Panda Eyes flame magnet Gold Donating Members 5,674 Member For: 16y 6m 13d Gender: Male Location: adelaide hills- 'race air' central Posted 29/07/11 03:27 PM Share Posted 29/07/11 03:27 PM its a 'built' motor xrated, so the rods and possibly pistons and oil pump are beefed up. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now