4SinAir Member 125 Member For: 16y 6m 23d Gender: Male Location: morley, perth Posted 27/06/10 07:48 AM Share Posted 27/06/10 07:48 AM can get a hold of some of these squirters for my ute there 2nd hand only had a couple dyno runs as they were to smallwhat price should I be paying around abouts?an whats the go with 2nd hand injectors do you need to get them flow matched? possible places in perthcheers fellas Link to comment Share on other sites More sharing options...
icer Banned 2,335 Member For: 15y 7m 23d Gender: Male Location: Aspendale, Vic. Posted 27/06/10 08:17 AM Share Posted 27/06/10 08:17 AM brand new they are 330 from ebay. I got them and are fine.Id say 250$ for those newish second handies Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,331 Member For: 19y 5m 18d Gender: Male Location: Perth Posted 27/06/10 08:58 AM Share Posted 27/06/10 08:58 AM EFI automotives in Balcatta will clean and flow test squirters. But a $80 ea to test and flow you would be better off buying a new set thats already matched.Theres also a mobile guy that i have used before and he's around $80 each as well. Seems to be the going rate Link to comment Share on other sites More sharing options...
4SinAir Member 125 Member For: 16y 6m 23d Gender: Male Location: morley, perth Posted 27/06/10 11:26 AM Author Share Posted 27/06/10 11:26 AM cheers im prob better off getting brand new, what would happen if I were to use these injectors they were on the same motor 4l turbo? Link to comment Share on other sites More sharing options...
Worm A much better forum Silver Donating Members 3,808 Member For: 16y 7m 18d Gender: Male Location: Victoria Posted 27/06/10 01:09 PM Share Posted 27/06/10 01:09 PM If they are not flow matched your tuner will find it harder to tune and you will be using extra fuel... And running rich (or lean) into some cylinders Link to comment Share on other sites More sharing options...
4SinAir Member 125 Member For: 16y 6m 23d Gender: Male Location: morley, perth Posted 28/06/10 11:04 AM Author Share Posted 28/06/10 11:04 AM ahk well they were used in a car for couple dyno runs from new would it be ok to use? could u say there flow matched if nothings been touched on them Link to comment Share on other sites More sharing options...
icer Banned 2,335 Member For: 15y 7m 23d Gender: Male Location: Aspendale, Vic. Posted 28/06/10 11:22 AM Share Posted 28/06/10 11:22 AM meh mine aint flow matched. 3 different tuners, no complaints about it.ask the guy who bough them if he got em flow matched. I dont know if there is a way to tell by looking at them if they are or not Link to comment Share on other sites More sharing options...
chippa Slippery when dry Donating Members 368 Member For: 17y 8m Gender: Male Location: Foot Hills W.A Posted 29/06/10 08:51 AM Share Posted 29/06/10 08:51 AM Gee $80 a pop seems a bit excessive my dekas were purchased new as a flow matched set but because I like to know things for sure I took them to a efi place in canningvale they bench test them on a machine all at once to compare flow rates....cost me $66 for the test,and yes they all flowed within 1% of each other Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now