HI PSI Member 1,586 Member For: 18y 6m 1d Gender: Male Location: Central Queensland Posted 28/12/10 08:46 AM Author Share Posted 28/12/10 08:46 AM Had a similar prob myself. The silicone joiners on mine were too long on the each end of the 45's, which meant it sat to far down.The solution was to trim about 30mm off each end of the silicone 45's where they meet the alloy pipe bend. This allowed the pipe to be higher and FURTHER BACK without causing any distortion of the joiner under the headlight. Thanks for the tip. I will give it another try tomorrow... Link to comment Share on other sites More sharing options...
LUCASZ Member 49 Member For: 14y 6m 22d Gender: Male Location: Box Hill, VIC Posted 28/12/10 12:13 PM Share Posted 28/12/10 12:13 PM They have come up quite well. Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 6m 1d Gender: Male Location: Central Queensland Posted 29/12/10 02:49 AM Author Share Posted 29/12/10 02:49 AM Update..Chris (Rapid Industries) gace me a call this morning and it is all fixed.. Thanks Chris you are a champ. The problem was no fault of his or the kit... It all came down to the fitter ---> ME !! I had the bottom pipe upside down... What a DILL The bar has now been refitted and the rear bar also.Now all I have to do is the DJR 320 side skirts. Lucky they have the Left/Right stamped on those.. Or I might f*ck that up to... HA HA ...I am thinking of cutting up my standard grille and fitting oit so that the grille doesn't look like crap....Thank you to all that gave me tips on the fitting..... Link to comment Share on other sites More sharing options...
RUS531 RUS531 Donating Members 410 Member For: 18y 3m 6d Gender: Male Location: Emerald QLD Posted 05/01/11 12:26 PM Share Posted 05/01/11 12:26 PM (edited) Hi all,Hipsi, the new gear is looking awesome!Are these still getting made? Can anyone send me the blokes details?CheersCameron Edited 05/01/11 12:29 PM by RUS531 Link to comment Share on other sites More sharing options...
RUS531 RUS531 Donating Members 410 Member For: 18y 3m 6d Gender: Male Location: Emerald QLD Posted 06/01/11 11:14 AM Share Posted 06/01/11 11:14 AM Anyone? Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 6m 1d Gender: Male Location: Central Queensland Posted 13/01/11 03:59 AM Author Share Posted 13/01/11 03:59 AM Just a quick update for those that contacted me for the details regarding the grille mesh.I recieved a phone call from Shane today. He has been on a 3 week holiday. So feel free to contact him now..... Link to comment Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 18y 3m 5d Gender: Male Location: Melbourne, VIC Posted 13/01/11 04:39 AM Share Posted 13/01/11 04:39 AM Hey HI PSI you dont have any pics of the front bar from the back do ya?Also how do the grills actually fit to the bars? Link to comment Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 18y 3m 5d Gender: Male Location: Melbourne, VIC Posted 13/01/11 04:39 AM Share Posted 13/01/11 04:39 AM Hey HI PSI you dont have any pics of the front bar from the back do ya?Also how do the grills actually fit to the bars? Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 6m 1d Gender: Male Location: Central Queensland Posted 13/01/11 08:21 AM Author Share Posted 13/01/11 08:21 AM Hey HI PSI you dont have any pics of the front bar from the back do ya?Also how do the grills actually fit to the bars?Sorry bud. Unfortunately I do not have any pictures from the inside of the bar. The mesh has screws that go into the factory bar around where the insert is.You can see where the slots for them are on the top and bottom..I am sure that they could be modified with tabs on them that you could bend over the insert. So that you coud sikaflex them to your glass bar... Link to comment Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 18y 3m 5d Gender: Male Location: Melbourne, VIC Posted 13/01/11 08:48 AM Share Posted 13/01/11 08:48 AM Thanks mate.. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now