MexicanBatman G666E Turbo!!! Member 1,008 Member For: 14y 11m 7d Gender: Male Posted 07/06/10 08:34 AM Share Posted 07/06/10 08:34 AM A big thanks to bluepower, I had my g6et flash tuned todayAn otherwise stock g6et mow has something like 276kw atw, more could be had but were running low boost 11-12psi @max KWShe's got a massive 60kwatw gain down low and is effortlessOn warm tyres it rips it up, dsc don't know what to do nowI did a 13.05 before tune, I'd be hoping for a 12.5 this time around if I can get it to stick Any estimations as to what the flywheel power would be?Also it made 244rwkw stockOnly mod is the k&n panel and xr8 lower box and pipe bitAlso if it were 533 nm stock what do ya reckon it could be now?Btw it peaked at 9 psi stock, now it's set to go to 14 I thinnk down low and taper off to 10-11 psi at max rpmI'm wrapped, yet still disappointed, why you say? Well the car is so smooth, take it easy and your L plate driver could drive it in the wet....But press the go pedal a bit and farrrk when it hooks up it launches harder on 2/3rd throttle than it went flat-out before..I was going to do full exhaust cooler and all that but if it's skating now I don't think 300rwkw would be any quicker on the street Link to comment Share on other sites More sharing options...
Buf-Phoon loitering with intent Lifetime Members 13,318 Member For: 21y 4m 4d Gender: Male Location: Zombie Birdhouse Posted 07/06/10 08:57 AM Share Posted 07/06/10 08:57 AM Congrats on the new power ~ 335 at the fly wheel Link to comment Share on other sites More sharing options...
IBOO57 Member 538 Member For: 15y 6m 10d Posted 07/06/10 09:10 AM Share Posted 07/06/10 09:10 AM Up around 355 KW at the flywheel IMHO.Give it a few months and 300 plus wont sound so silly once you adjust. Link to comment Share on other sites More sharing options...
Worm A much better forum Silver Donating Members 3,808 Member For: 16y 5m 1d Gender: Male Location: Victoria Posted 07/06/10 09:11 AM Share Posted 07/06/10 09:11 AM Nice work mate... I'm guessing it spools up pretty quick with that turbo too!!! Link to comment Share on other sites More sharing options...
MexicanBatman G666E Turbo!!! Member 1,008 Member For: 14y 11m 7d Gender: Male Posted 07/06/10 09:16 AM Author Share Posted 07/06/10 09:16 AM Yeah it's up 60kwatw when it comes on to boost... No lag...I'd love to know the torque numbers now as the gain there is more impressive than the peak kw output Link to comment Share on other sites More sharing options...
Buf-Phoon loitering with intent Lifetime Members 13,318 Member For: 21y 4m 4d Gender: Male Location: Zombie Birdhouse Posted 07/06/10 09:22 AM Share Posted 07/06/10 09:22 AM Up around 355 KW at the flywheel IMHO.You used 22 % driveline loss I used 17% , split the difference with you Link to comment Share on other sites More sharing options...
INASNT Member 361 Member For: 18y 4m 3d Gender: Male Location: Melbourne Posted 07/06/10 10:59 PM Share Posted 07/06/10 10:59 PM Yeah it's up 60kwatw when it comes on to boost... No lag...I'd love to know the torque numbers now as the gain there is more impressive than the peak kw outputThey could have graphed the torque for you also if you asked Link to comment Share on other sites More sharing options...
ronburgundy I love gooold member Donating Members 1,222 Member For: 15y 11m 21d Gender: Male Location: Melbourne (west) Posted 07/06/10 11:00 PM Share Posted 07/06/10 11:00 PM I would have thought they typically would? Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 29d Gender: Male Location: Probably above atmospheric pressure Posted 08/06/10 03:18 AM Share Posted 08/06/10 03:18 AM Yeah ask for the torque graph of your run Great power from the FGs, great times too for stock let alone tune only! Link to comment Share on other sites More sharing options...
MexicanBatman G666E Turbo!!! Member 1,008 Member For: 14y 11m 7d Gender: Male Posted 08/06/10 06:19 AM Author Share Posted 08/06/10 06:19 AM Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now