John_K Donating Members 438 Member For: 15y 11m 24d Gender: Male Location: Sydney Posted 02/07/10 02:22 AM Share Posted 02/07/10 02:22 AM Yeah the numbers seem to match up. The only difference I can see is one says "Ford" and the other says "HL" Link to comment Share on other sites More sharing options...
louiseanddanny 10.5 @ 132MPH Donating Members 477 Member For: 16y 10m 4d Gender: Male Location: FALCON COUNTRY Posted 02/07/10 06:11 AM Author Share Posted 02/07/10 06:11 AM Yeah the numbers seem to match up. The only difference I can see is one says "Ford" and the other says "HL"Sorry mate because I dont have a modem it blew up (must have been made by holden)for the delay ,riverside wanted to charge me $50 for the pair. There great shots man really helpful going to have to grab them now knowing they dont look that bad for an aftermarket one.Thanks for the help!!! Link to comment Share on other sites More sharing options...
boost69 Donating Members 737 Member For: 19y 6m 10d Posted 02/07/10 08:35 AM Share Posted 02/07/10 08:35 AM So the after market ones just dont have the straps from the looks of it...did the mount you took off your car have the straps?I might have to buy aftermarket too next time it seems... Link to comment Share on other sites More sharing options...
John_K Donating Members 438 Member For: 15y 11m 24d Gender: Male Location: Sydney Posted 02/07/10 09:29 AM Share Posted 02/07/10 09:29 AM So they ripped me off $10... bloody cheeky buggers!Yeah, the original one had the straps on it.Just took the straps off and put them on the new one. Link to comment Share on other sites More sharing options...
White Knight Donating Members 73 Member For: 15y 1m 9d Gender: Male Location: Sydney Posted 01/08/10 12:11 PM Share Posted 01/08/10 12:11 PM Thanks to everyone who contributed to this thread - really helped me, just changed both of mine today. The stationary vibration is now GONE. We'll see how she goes on the drive to work tomorrow I'll second that there was no need to pull the turbo off, just dropped the dump pipe - anyone doing this make sure you secure your oxygen sensor wiring if you remove it away from the headers.Pictures of old and new attached for anyone who's interested... Link to comment Share on other sites More sharing options...
Alistair McKinley Member 4 Member For: 15y 5m 21d Gender: Male Location: 3123 Posted 07/08/10 11:01 AM Share Posted 07/08/10 11:01 AM Gday mate,My ute has had the same problem for months now and finally had it fixed today, it has been getting worse and worse, very embarasing if anyone else was in the car, and had to drop it into neutral when ever at a stop to be able to sit in it. Replaced both engine mounts today, and it drives like a brand new ute! The mount under the turbo was sightly melted, and very cracked due to the heat and had compressed, and the other was also compressed somewhat compared to the new ones put it. hope this helps anyone who may have this problem in the future. By the way the ute has done 150,000 kms. I thought the mounts would have lasted a bit longer than that! Link to comment Share on other sites More sharing options...
MICKAJ Member 245 Member For: 16y 9m 3d Posted 10/11/10 11:06 PM Share Posted 10/11/10 11:06 PM (edited) Just replaced my drivers side this week, I had problems getting the mount out of the top bracket, it was very tight.Couldn't get the new mount seated all the way into the top bracket either which was annoying. Anyone else have that problem?I'm just going to wait a couple of months til it settles then go in again and retighten. Edited 10/11/10 11:07 PM by MICKAJ Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now