kovac Member 68 Member For: 15y 10m 13d Gender: Male Location: campbelltown Posted 04/06/10 01:02 AM Share Posted 04/06/10 01:02 AM hey guys a mate of mine has a ba xr6 n/a he had an argument with the mechanic so all he has done is installed the valve springs.Are the cams easy to install? (with basic mechanical knowledge)and if so does antone have photos or a write up on how to install these. and is there a certain way to put them in eg: like the old dizzy's.the cams he has are not crow cams its from a company from WA which they say there is no stages but will increase power ?????? cheers in advance Link to comment Share on other sites More sharing options...
PHANTMXR6 It's not a MKI! Member 1,742 Member For: 16y 5m 6d Gender: Male Location: Earth Posted 04/06/10 02:09 AM Share Posted 04/06/10 02:09 AM If you have no experience in this area, I would strongly advise against it.You can cause too much damage by incorrectly installing a cam. Take it to a good mechanic to have it done. Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 9m 18d Gender: Male Location: SW Sydney Posted 04/06/10 04:11 AM Share Posted 04/06/10 04:11 AM Agreed If you take things off in the wrong order or put the cam brackets in in te wrong order or over tighten you can cause some real issues - definitely find a new mechanic Link to comment Share on other sites More sharing options...
GOLDIE My new toy Lifetime Members 5,344 Member For: 21y 7m 4d Gender: Male Location: stanthorpe wine capital of qld. Posted 04/06/10 04:30 AM Share Posted 04/06/10 04:30 AM as said above dont take the risk.I could do it but you live 10 hours from me.I have done them before.Ian Link to comment Share on other sites More sharing options...
icer Banned 2,335 Member For: 15y 4m 8d Gender: Male Location: Aspendale, Vic. Posted 04/06/10 06:20 AM Share Posted 04/06/10 06:20 AM you can break rockers/lifters which is BIG BAD NEWS + new head and more when u try crank the car over (and it wont start..just keeps cranking!) Link to comment Share on other sites More sharing options...
kovac Member 68 Member For: 15y 10m 13d Gender: Male Location: campbelltown Posted 04/06/10 11:47 PM Author Share Posted 04/06/10 11:47 PM The cams and springs are in place just need to put the brackets in and a new timing chain in. Are v6 cam installation similar to the i6 as I know someone who has installed plenty of v6 cams Link to comment Share on other sites More sharing options...
PHANTMXR6 It's not a MKI! Member 1,742 Member For: 16y 5m 6d Gender: Male Location: Earth Posted 05/06/10 01:26 AM Share Posted 05/06/10 01:26 AM Find someone who knows the Ford I6.There are too many variables. Link to comment Share on other sites More sharing options...
kovac Member 68 Member For: 15y 10m 13d Gender: Male Location: campbelltown Posted 05/06/10 01:56 AM Author Share Posted 05/06/10 01:56 AM Ok cheers I'll let him know Link to comment Share on other sites More sharing options...
Scarecrow Member 13 Member For: 14y 5m 28d Gender: Male Location: Adel, SA Posted 05/06/10 09:44 AM Share Posted 05/06/10 09:44 AM Not that hard dude if you have a bit of an idea, just have to time everything right. But saying that I am a mechanic lol Link to comment Share on other sites More sharing options...
mattyb Donating Members 1,097 Member For: 16y 5m 12d Gender: Male Location: Gold Coast, QLD Posted 05/06/10 12:20 PM Share Posted 05/06/10 12:20 PM I rebuilt my motor with a mate who is a heavy earthmoving fitter, the turbo's he's used to are 2 person lifts, and the pistons ar 20kg lol. He was an unbeleivable help... as long as you use someone who inderstands timing, you're sweet, but you'll be in need of a tune anyway. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now