Jump to content

600Kw Stock Internals


darios typhoon

Recommended Posts

  • Gold Donating Members
  • Member For: 19y 6m 25d
  • Gender: Male

As discussed with you prior Dario your engine combination running with that small turbo cannot accommodate for the increased flow and cylinder head efficiency that the stage 4's provide :innocent: You are basically out of puff by 6200rpm on that turbo :dontknow: If you check its pounds per minute flow chart you will ascertain this quickly by converting flow/pressure to Horsepower.

Everybody is entitled to their opinion, however these cams have been tested (controlled environment testing) back to back on many other cars with larger setups, the increases are a minimum of 18-25%, crap is a large statement brother :bopp: why not just state that they are not for you and the configuration you wish to run? :spoton::beerchug::icon_ford:

Ps: I wouldn't mind seeing your torque curve before and after Dario as well, that is where most of the benefits become apparent (duration & slope) this is more important than the power figure :beerchug:

Edited by SPIKO
Link to comment
Share on other sites

  • Replies 82
  • Created
  • Last Reply

Top Posters In This Topic

  • Member
  • Member For: 15y 5m 1d
  • Gender: Male
  • Location: northern beaches

As discussed with you prior Dario your engine combination running with that small turbo cannot accommodate for the increased flow and cylinder head efficiency that the stage 4's provide :innocent: You are basically out of puff by 6200rpm on that turbo :dontknow: If you check its pounds per minute flow chart you will ascertain this quickly by converting flow/pressure to Horsepower.

Everybody is entitled to their opinion, however these cams have been tested (controlled environment testing) back to back on many other cars with larger setups, the increases are a minimum of 18-25%, crap is a large statement brother :bopp: why not just state that they are not for you and the configuration you wish to run? :spoton::beerchug::icon_ford:

out of puff ?

even at low boost they dont perform as well as stock ones so it not out of puff at 15 psi

Link to comment
Share on other sites

  • Donating Members
  • Member For: 18y 8m 29d
  • Gender: Male
  • Location: Canberra

So Spiko, do you recommend the vernier gears or the stock variable gears?

I'm thinking that the stock variable gears might be the better option to keep both bottom end torque and top end power?

Cheers, Max

Link to comment
Share on other sites

  • 2 months later...
  • Donating Members
  • Member For: 18y 8m 29d
  • Gender: Male
  • Location: Canberra

So just to summarise, I'm hearing that the Stage 4 cams are not really suited to any iteration of a modified GT3582, but would most likely work well on a GT42 or larger.

Is this the general thinking? I'd appreciate your thoughts.

Link to comment
Share on other sites

  • 6 months later...
  • I see a red door and I want to paint it black
  • Donating Members
  • Member For: 15y 6d
  • Gender: Male
  • Location: Far north queensland

Must have been tuned by the WOG to get those sort of results. Dave from CPV had 600+ on a BA didn't he? pretty sure it was a fair bit more than 16psi

Edit - Is it 620 or 482? I be a bit confused at the gain of 138rwkw in 10 mins

Yeah mate ull be sweet I'm running 482 at the wheels with a stock box n diff just had to go full blown race clutch it just tore the stock 1 apart lol

Edited by sideways82
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
  • Create New...
'