IH8TOADS Silver Donating Members 3,618 Member For: 19y 5m 5d Gender: Male Location: OZ Posted 30/05/10 02:05 PM Share Posted 30/05/10 02:05 PM I did some reading, the injector dynamics website says they are 'specially modified' but given how extensive the EV-14 motorsport range is.....specially selected (for size) and then wiz bang matched might be more correct as trana stated! Anyway the ID's are really good, apart from the cost, but like the FRP calibration data for the deka 60's the data for the ID's doesn't work straight off the sheet and you need to be competent with modifying all aspects ofthe scaling and then some to get them perfect. But whatever injector type you get, getting a flow matched set definately makes a difference. Link to comment Share on other sites More sharing options...
nelsonian101 Donating Members 961 Member For: 16y 5m 18d Gender: Male Location: Sydney Posted 07/07/10 08:53 AM Share Posted 07/07/10 08:53 AM I bought some 3/4 length Bosch EV14's off ebay $79ea (with orange stripe), but was told by my tuner they were not a straight bolt in for the FG's. I think I needed some plug adapters so am contacting the guy I bought them off. Doing some more research. Link to comment Share on other sites More sharing options...
Bo0st3D XR6 Member 57 Member For: 14y 10m 11d Gender: Male Posted 07/07/10 11:11 AM Share Posted 07/07/10 11:11 AM No way! The guy assured me it was direct swap for the FG that's y I bought a set. Can someone confirm please? EV14 60LB BOSCH FUEL INJECTORS FG XR6T LS1-9 3/4 LENGTH - eBay Other, Air Intake, Fuel Delivery, Car Parts, Accessories, Cars, Bikes, Boats. (end time 17-Jul-10 11:04:15 AEST) Link to comment Share on other sites More sharing options...
XYZ Donating Members 1,171 Member For: 15y 2m 26d Posted 07/07/10 11:44 AM Share Posted 07/07/10 11:44 AM I Love the ID1000's... Call Hiro, Karl has some good deals on them...Ben Link to comment Share on other sites More sharing options...
Bo0st3D XR6 Member 57 Member For: 14y 10m 11d Gender: Male Posted 07/07/10 12:32 PM Share Posted 07/07/10 12:32 PM The supplier just assured me that it is indeed a direct fit for the FG with the Correct height, correct o-ring size, and correct UScar connector Link to comment Share on other sites More sharing options...
nelsonian101 Donating Members 961 Member For: 16y 5m 18d Gender: Male Location: Sydney Posted 08/07/10 09:12 AM Share Posted 08/07/10 09:12 AM PM sent.Since then, we have both found out this is incorrect advice from the supplier. An adapter plug is required to fit the FGXR6T. Just hoping the length is correct!!Has anyone else had experience with fitting these Bosch EV14's part no. 0 280 158 117, or know of any tuners that have experience with them? More info below:http://www.bosch-motorsport.com/pdf/components/injection_valves/EV_6.pdf Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 5m 5d Gender: Male Location: OZ Posted 08/07/10 10:14 AM Share Posted 08/07/10 10:14 AM They're not ID1000's although the ID's are a EV-14 design. The factory plug is that of a EV-1 (well ba/bf is) whereas the EV-14's is a USCAR. SO you simply need a USCAR to EV-1 adaptor. Done fixed. Here's an example of an EV-14 with the adaptor fitted. Link to comment Share on other sites More sharing options...
Ekul Member 15 Member For: 13y 7m 24d Gender: Male Location: Hawkes Bay - New Zealand Posted 19/04/11 11:51 PM Share Posted 19/04/11 11:51 PM Have posted this elsewhere, but this seems like a more appropriate thread.Are Bosch 968 injectors longer than the standard FG XR6T original injectors?I have a set of new ones and wondered if they can be easilly fitted and will they deliver a worthwhile improvement along with a panel K&N and a re-tune. All just standard at the moment and use only 98RON gas.What level of improvement could I get if they can be fitted etc?Thanks. Link to comment Share on other sites More sharing options...
Paulie2256 Donating Members 7,441 Member For: 16y 21d Gender: Male Location: SE Melbourne Posted 20/04/11 02:21 AM Share Posted 20/04/11 02:21 AM Hi Ekul, If you are changing injectors you will also need a retune. Link to comment Share on other sites More sharing options...
Ekul Member 15 Member For: 13y 7m 24d Gender: Male Location: Hawkes Bay - New Zealand Posted 20/04/11 09:28 AM Share Posted 20/04/11 09:28 AM Hi Ekul, If you are changing injectors you will also need a retune.Thanks Paulie - I realise that I will need a re-tune. Just wondered if these injectors by themselves will deliver a worthwhile improvement. I got them for nothing, and because I am considering a tune, I thought I would get these installed too, as it probably won't cost that much more with a tune to get them installed?If they won't help things much by themselves with the tune - I will just get a performance tune and stay with standard eqyuipment. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now