murrayallstar Member 71 Member For: 19y 28d Posted 03/05/10 07:13 AM Share Posted 03/05/10 07:13 AM Stupid Question. I was after an adaptor for the hose that runs from the tappet cover (crank case)to the pipe run underneath the battery.Ive got one of your rapid system 2.5 kit.The Hose Sticks up alittle bit off the motor than runs across to the under battery pipe.Ive seen some cars that seem to have a right angle on the end of the hose and run a longer pipe to the front of the motor and along the top of the radiater.I know its only a small thing,but I was trying to clean up some of the hosing under the bonnet of my car. Im not very mechanically minded if you cant already tell by this but hopefully someone can understand what im asking for Link to comment Share on other sites More sharing options...
FPV6T UNDERCOAT CRUISER!!! Donating Members 1,655 Member For: 15y 8m 2d Gender: Male Location: brisbane Posted 03/05/10 07:29 AM Share Posted 03/05/10 07:29 AM yeah mate you can buy the right angled elbow from supercheap,makes the hose sit lower to the engine.hope this helps... Link to comment Share on other sites More sharing options...
murrayallstar Member 71 Member For: 19y 28d Posted 03/05/10 07:55 AM Author Share Posted 03/05/10 07:55 AM (edited) Thanks For ThatAnything I need to ask for specifically Edited 06/05/10 11:13 AM by RHR No need to quote above post Link to comment Share on other sites More sharing options...
FPV6T UNDERCOAT CRUISER!!! Donating Members 1,655 Member For: 15y 8m 2d Gender: Male Location: brisbane Posted 03/05/10 08:07 AM Share Posted 03/05/10 08:07 AM nah,they have them on the spinning racks usually next to the nut and bolt packs.just make sure you get the right sized one. Link to comment Share on other sites More sharing options...
HI PSI Member 1,582 Member For: 18y 3m 25d Gender: Male Location: Central Queensland Posted 03/05/10 09:01 AM Share Posted 03/05/10 09:01 AM I put a breather on mine instead and blocked off the fitting on the UBP.... Looks alot neater also.... Link to comment Share on other sites More sharing options...
BensXR6T Member 478 Member For: 15y 8m 13d Gender: Male Location: Burpengary QLD Posted 03/05/10 09:34 AM Share Posted 03/05/10 09:34 AM Get smacked fingers if you get caught venting the crankcase to the atmo. Then again ... I do agree I does look a lot neater - damn stupid pollution laws Link to comment Share on other sites More sharing options...
murrayallstar Member 71 Member For: 19y 28d Posted 03/05/10 10:09 AM Author Share Posted 03/05/10 10:09 AM Does anyone have a close up photo of what they look likeI would like to purchase one before the weekend Link to comment Share on other sites More sharing options...
murrayallstar Member 71 Member For: 19y 28d Posted 06/05/10 11:11 AM Author Share Posted 06/05/10 11:11 AM Can anyone assist me with this. Not Having Much luckI went to 3 auto shops today but no one knew what I was talking about.The closest I could get was a complete replacement PCV valve with an elbow.Is this what I need or can I just get an elbow that connects to me existing pcv valve Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now