lat45 Member 14 Member For: 14y 11m 16d Gender: Male Location: brisbane Posted 02/05/10 07:57 AM Share Posted 02/05/10 07:57 AM Hi there I picked up a cooler off one of my mates brand new I think he got it of ebay if I put this on my car will anything bugger up it has the 3 1/2 inch x force exhaust and that's about it its a 2004 ba Thank u in advance 1 Link to comment Share on other sites More sharing options...
Molloy Member 216 Member For: 17y 1m 15d Gender: Male Location: Taree Posted 02/05/10 09:54 AM Share Posted 02/05/10 09:54 AM (edited) Id get it tuned and checked out Edited 02/05/10 09:55 AM by Molloy Link to comment Share on other sites More sharing options...
boosted_XR Member 364 Member For: 16y 8m 20d Posted 02/05/10 12:09 PM Share Posted 02/05/10 12:09 PM same id take it somewhere and get it tuned just 2 make sure that everything is running fine. its up 2 you though just recommended. Link to comment Share on other sites More sharing options...
lat45 Member 14 Member For: 14y 11m 16d Gender: Male Location: brisbane Posted 03/05/10 07:02 AM Author Share Posted 03/05/10 07:02 AM On 02/05/2010 at 9:54 AM, Molloy said: Id get it tuned and checked outanyone no some good tuners in qld for the xr6t Link to comment Share on other sites More sharing options...
Guest Slash Guests Posted 03/05/10 07:36 AM Share Posted 03/05/10 07:36 AM You will need it tuned for it to run at it's optimum potential.Is it a turbo back exhaust or just cat-back?Is the cooler you have similar in design to standard in that the inlet & outlet both point to the driver's side of the car?If it's a cat-back system & cooler similar to that above, the car will still drive without going into limp mode & probably gain a few kw's but it will be running much leaner than when it was stock. Link to comment Share on other sites More sharing options...
icer Banned 2,335 Member For: 15y 8m 17d Gender: Male Location: Aspendale, Vic. Posted 03/05/10 08:56 AM Share Posted 03/05/10 08:56 AM I got cooler pipes for sale. 600$ for them all.these pipesNo cooler/core. Will come with clamps and silicon joiners and everything. $650 posted. let me know if your interested. Less then 2000km old. Good for 420-450rwkw~ with the supporting cooler. Link to comment Share on other sites More sharing options...
bluprinturbo Donating Members 605 Member For: 16y 10m 23d Gender: Male Location: brisbane Posted 03/05/10 08:58 AM Share Posted 03/05/10 08:58 AM On 03/05/2010 at 7:02 AM, lat45 said: anyone no some good tuners in qld for the xr6tbrisbane turbo and tuning or hi-torque Link to comment Share on other sites More sharing options...
BensXR6T Member 478 Member For: 16y 2m 28d Gender: Male Location: Burpengary QLD Posted 03/05/10 09:31 AM Share Posted 03/05/10 09:31 AM Where in QLD?Gold Coast - Hi torqueEast Brisbane - BPSSouth Brisbane/Ipswich - EliteNorth Brisbane - RDP Link to comment Share on other sites More sharing options...
Stazza_Brendan Donating Members 686 Member For: 15y 5m 23d Gender: Male Location: Mackay QLD Posted 03/05/10 09:50 AM Share Posted 03/05/10 09:50 AM I put a replacement intercooler with pipes on my xr6 (leaving the UBP and crossover as only stock piping) and on a dyno my mixtures were fine, if anything rich. Link to comment Share on other sites More sharing options...
BensXR6T Member 478 Member For: 16y 2m 28d Gender: Male Location: Burpengary QLD Posted 03/05/10 10:19 AM Share Posted 03/05/10 10:19 AM AFR's normally only cost ~$75 on a dyno to get checked, so it's pretty cheap to have the confidence that all's good. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now