Jump to content

Clutch Making Grinding Noise While Disengaging/Engaging


carbz

Recommended Posts

  • Member
  • Member For: 14y 11m 16d
  • Gender: Male
  • Location: Townsville

Yesterday I took my car for a strap and I didnt notice it straight away. it was about 10 mins of normal driving I noticed a grinding noise and slight vibration through the clutch pedal while engaging and disengaging gears. it doesnt do it every time but every now and then. its only while the pedal is half ways pressed down. to me it sounds like the plate is rubbing on the flywheel.

Just want to know what you guys rekon it is. im going to change my clutch fluid and see if that makes any difference.

I would actually say its more of a scrapping sound

Link to comment
Share on other sites

  • Donating Members
  • Member For: 16y 11m 22d
  • Gender: Male

u sure its not the gearbox grinding coz the clutch is stuffed ? if you're holding the clutch halfway down, the plate IS rubbing on the flywheel. of course its gonna shudder/vibrate.

Link to comment
Share on other sites

  • BOOST
  • Moderating Team
  • Member For: 21y 4m 4d
  • Gender: Male
  • Location: Southern Highlands NSW

By looking at his Avatar it could be a Ba with the 5 speed. You could be right in saying its a gear box issue

Link to comment
Share on other sites

  • Member
  • Member For: 14y 11m 16d
  • Gender: Male
  • Location: Townsville

I changed the gearbox to a t56 with a mwa opt 3+ clutch setup 5000k ago.

it goes into gear fine and out of gear fine but has a slight scrapping sound and a slight vibration in the pedal.

Link to comment
Share on other sites

  • Donating Members
  • Member For: 16y 11m 22d
  • Gender: Male

who installed it, flywheel could be loose or warped. unless it has always done it. heavy duty clutches are always a bit more noisey. is it the stock flywheel ?

Edited by mic
Link to comment
Share on other sites

  • Member
  • Member For: 14y 11m 16d
  • Gender: Male
  • Location: Townsville

a mate and myself installed it.

• 11" Billet Steel Flywheel

• 11" Billet Steel Burst Proof Pressure Plate with Increased Clamp

• 11" High Performance Sprung Organic Composite Plate

• Alloy Concentric Slave Cylinder

• Flywheel and Pressure Plate Bolts

I checked the clutch fluid and it is really dirty looking.

nothing shutters while releasing the clutch. just a slight vibration sometimes in the pedal.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'