cranny Donating Members 123 Member For: 16y 7m 30d Gender: Male Location: Sydney NSW Posted 11/04/10 08:34 AM Share Posted 11/04/10 08:34 AM Hey Guys,I have a 2006 BF Typoon with a ZF 6spd last nite I was in a car park with big BUMPS and I felt the car bottom out. about 5 min later I smelt burning oil. I had cracked the plastic sump on my gearbox. and the oil was pissing out. (still is)first question is have I ruined the box it still ran fine changing just as smooth as ever. could that 5 mins of leaking oil hurt the gearbox. who in Sydney is equipped to deal with these and where do I get the parts. ( I want the Best Place possible)oh by the way Fraud wanted 1300 to change oil and pan. Cheers guys Link to comment Share on other sites More sharing options...
BensXR6T Member 478 Member For: 15y 10m 22d Gender: Male Location: Burpengary QLD Posted 11/04/10 08:42 AM Share Posted 11/04/10 08:42 AM I doubt you would have done any damage as long as no crud got into the box. As for the pan, ford might be your only choice to get one. Shouldn't be a huge job if you have a few basic tools to do it yourself. I presume $1,300 is supplied, fitted and serviced by ford.You could try a few wrecking yards, but I would doubt they would be willing to separate the sump from the box.Good Luck,Ben Link to comment Share on other sites More sharing options...
_Spin_ Donating Members 695 Member For: 16y 9m 23d Posted 11/04/10 08:45 AM Share Posted 11/04/10 08:45 AM (edited) Isn`t the filter integral with the pan, and would be supplied if you buy service kit?There are threads about servicing the ZF on here somewhere. Edited 11/04/10 08:46 AM by _Spin_ Link to comment Share on other sites More sharing options...
Buf-Phoon loitering with intent Lifetime Members 13,318 Member For: 21y 3m 9d Gender: Male Location: Zombie Birdhouse Posted 11/04/10 08:48 AM Share Posted 11/04/10 08:48 AM You should be fine.Get your tuner to do the job or one of the sites sponsors as they will be a lot cheaper than Fraud.They will pay wholesale for the parts and you will not be anally raped for retail and labour Link to comment Share on other sites More sharing options...
sexual harrassment panda I see a red door and I want to paint it black Donating Members 5,919 Member For: 15y 1m 2d Gender: Male Location: Far north queensland Posted 11/04/10 09:50 AM Share Posted 11/04/10 09:50 AM get onto motospecs - they will sell you genuine or aftermarket sump/filter assemblies. They will also be able to sell you a steel sump pan if you decide to go down that path. They sell the genuine oil in 20L drums too Link to comment Share on other sites More sharing options...
SuckSqueezeBangBlow ʎǝʞuoɯ ɹoıuǝs Donating Members 1,808 Member For: 15y 11m 12d Gender: Male Posted 11/04/10 10:28 AM Share Posted 11/04/10 10:28 AM I can recommend Dominello's at Dural. top bloke. Link to comment Share on other sites More sharing options...
trevs Member 781 Member For: 17y 7m 7d Gender: Male Location: balmain Posted 11/04/10 10:33 AM Share Posted 11/04/10 10:33 AM (edited) I paid 132 bucks I think for the filter from ford which is also the plastic sump you cracked and oil to suit in a 20ltr drum from my local parts shop for about 250 bucks I think penrite was the oil I bought I cant remember the grade the drums in the shed I can have a look tomorrow if needed ive been using it for 60000km with no problems so faralso with supplying parts the local gearbox guy only charges me 140 bucks for an oil and filter change he also does all the local ford dealer work and has repaired a few zf boxes for ford the shop is based in wollongong though in any case anybody charging more than 400 bucks for an oil and filter change using after market oil is ripping ppl off cheers trev Edited 11/04/10 10:35 AM by trevs Link to comment Share on other sites More sharing options...
John_K Donating Members 438 Member For: 15y 11m 23d Gender: Male Location: Sydney Posted 11/04/10 01:37 PM Share Posted 11/04/10 01:37 PM (edited) Contact Ben at AutoPro Fairfield (Ph: 9727-6128), he should have in stock an aftermarket pan bottom, filter & 4 or 5 litre bottles (rather than a 20l drum) of the correct trans fluid to suit the ZF (can't remember which one it was he had). Edited 11/04/10 01:39 PM by John_K Link to comment Share on other sites More sharing options...
trevs Member 781 Member For: 17y 7m 7d Gender: Male Location: balmain Posted 12/04/10 10:18 AM Share Posted 12/04/10 10:18 AM (edited) the penrite oil I used meets the 6 speed zf gearbox requirments used in our cars and so do many other oils the box used in our cars has been around for years in other carsunless you enjoy giving ford even more money the standard oil (Shell ATF M-1375.4) is nothing special regardless of what ppl on this site like to think and the only reason its so dear is because ford au own the rights to sell it simple as that supply and demand $$$$$$$http://www.penriteoi...0JAN%202010.pdf Edited 12/04/10 10:22 AM by trevs Link to comment Share on other sites More sharing options...
sexual harrassment panda I see a red door and I want to paint it black Donating Members 5,919 Member For: 15y 1m 2d Gender: Male Location: Far north queensland Posted 15/04/10 08:11 PM Share Posted 15/04/10 08:11 PM trevs - can you tell me where you got the sump/filter for $130ish? fraud cairns wanted $400 last time I ckecked. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now