Guest Scott Greco Guests Posted 29/03/10 09:01 AM Share Posted 29/03/10 09:01 AM haha yer no luck yet might get all the fuel system done then put him on a truck and off to ford Link to comment Share on other sites More sharing options...
Guest Scott Greco Guests Posted 30/03/10 09:15 AM Share Posted 30/03/10 09:15 AM got the dual zone all working today I used hanatech scan tool I was just doing it in the wrong order have to program the keys first then do the 10min relink Link to comment Share on other sites More sharing options...
Bullet Member 14 Member For: 14y 9m 10d Posted 31/03/10 08:52 AM Share Posted 31/03/10 08:52 AM Bet you're relieved?Well done. It sounds like a big job? Link to comment Share on other sites More sharing options...
stevemitch Member 4 Member For: 16y 8m 30d Posted 23/05/10 02:04 AM Share Posted 23/05/10 02:04 AM got the dual zone all working today I used hanatech scan tool I was just doing it in the wrong order have to program the keys first then do the 10min relinkOnly gust found this thread. What cable/program are you using to set up the car and can you still get it? Sound good that you can program new keys to the bem unit. I though that it was a major to get new keys programed. Could work out cheaper to buy the cable than to go to ford to replace keys. Link to comment Share on other sites More sharing options...
Guest Scott Greco Guests Posted 02/06/10 10:15 AM Share Posted 02/06/10 10:15 AM hey sorry I took so long to reply I thing the hanatech is worth a few grand I browed it from a mate who is an auto leckie I all so found out that the snap on scan to can all so program keys Link to comment Share on other sites More sharing options...
454steve New Member 1 Member For: 5y 10m 12d Posted 04/01/19 04:56 PM Share Posted 04/01/19 04:56 PM Hey I got ford to do one today and they put the original bem from the old on but their scan tool would not register. Everything still worked like air con, lights door locks and the car still started but no radia cause of "code". So I paid the $300 they charged me to replace it nd reprogram a new key. They only way I can get rid of code temporally is by pressing FM and home button together. Any suggestions to get rid of "code" permanently? And yes ive taken the battery out for a while then started back up it tripped my fuel sensor but not my icc. All fuses seem to be fine. Ford suggested checking the wiring in the car but that could be a big job. Any ideas? Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 5m 22d Gender: Male Location: Central Queensland Posted 04/01/19 11:58 PM Share Posted 04/01/19 11:58 PM I run a stand alone Haltech engine management system. As I had no factory EMS, my ICC could not link and thereby displayed the security code. Car ran, Dual zone etc woked.. I sent the ICC to Fadi, at https://www.aslautomedia.com.au/. They removed the security from the ICC and all is well again. Was $120 total... 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now