Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 1m 20d Gender: Male Location: Perth Posted 21/05/10 02:16 AM Share Posted 21/05/10 02:16 AM Just make sure all the joiners go back on correctly otherwise you'l have drama's making any boost. The TB to X-over is a biatch Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 1m 20d Gender: Male Location: Perth Posted 25/05/10 08:01 AM Share Posted 25/05/10 08:01 AM Had a look at Manho's car on sat'd turned out the Accelerator Pedal Position sensor is throwing out bulk codes and not doing what it should. The rough running and elevated revs at idle is a limp mode reaction to the dodgy feed back from the pedal.We put it down to the fact that in all the time Ross has owned the car its never been over 1/4 throttle, that was until he lent it too his Mum. The car obviously freaked out over the way Ross's Mum drives and now its in limp mode. Accel pedal sensor looks like a biacth to replace as the pedal box assembly has to come out to remove it Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 1m 21d Gender: Male Location: Perth, WA Posted 25/05/10 08:28 AM Share Posted 25/05/10 08:28 AM (edited) What error code is associated with the Accelerator Pedal Position sensor? Edited 25/05/10 08:29 AM by XtRmn8 Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 1m 20d Gender: Male Location: Perth Posted 25/05/10 08:42 AM Share Posted 25/05/10 08:42 AM I couldnt tell you the all codes at the moment as im away for work and dont have the log but IIRC the car was throwing:P2105 Throttle Actuator Control System - Forced Engine Shutdownit was also throwing a code (i forget the DTC) for forced rpm/speed limit via ETCand a code for Accelerator A/D Sensor out of range/error. Link to comment Share on other sites More sharing options...
Philbo84 Member 20 Member For: 15y 11m 26d Posted 07/06/10 01:07 AM Share Posted 07/06/10 01:07 AM Hi AllI have currently replaced my TPS on my BA turbo ute and still have the reving problem and stalling, when pulling upto a set of lights or doin a slow lazy gear change, I am considering changing the whole throttle bottle and possibly the sensor under the peddle, do you still believe this is the problem causing the issue or could it be caused by some other issue.Cheers Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 1m 20d Gender: Male Location: Perth Posted 07/06/10 03:48 AM Share Posted 07/06/10 03:48 AM Unfortunatly despite the acc pedal sensor codes that where being thrown out by Ross's car, it turned out that and airleak between the upper Plenum and manifold was the cause, It probably wouldnt hurt to start there before throwing anymore parts at your carcheersLuke Link to comment Share on other sites More sharing options...
Philbo84 Member 20 Member For: 15y 11m 26d Posted 07/06/10 09:36 AM Share Posted 07/06/10 09:36 AM Hey LukeThnx for the info I will have a look into that area first, before spending big, bloody throttle bodies are expensive for what they are......Cheers Phill Link to comment Share on other sites More sharing options...
longy89 Donating Members 38 Member For: 14y 7m 7d Posted 07/06/10 11:25 PM Share Posted 07/06/10 11:25 PM My thing is driving good again for some reason. I think after I tightened all of the IC pipes when changing the coolant, an air leak might have been fixed up. Anyway we'll see how we go. Thanks for the ideas guys Link to comment Share on other sites More sharing options...
GTEXXED Banned Banned 910 Member For: 12y 3m 23d Gender: Male Posted 23/11/12 11:42 AM Share Posted 23/11/12 11:42 AM Can a faulty TPS allow the car to hold vehicle speed when getting off the accelerator pedal and in some cases after slowing to 30kmh/r odd and getting off the brakes the car will slowly make it's way up to speed again under it's own steam,no pedal input at all. Link to comment Share on other sites More sharing options...
Never had any say Panda I <3 Floods Silver Donating Members 11,198 Member For: 13y 3m 11d Gender: Male Location: South West QLD Posted 23/11/12 08:17 PM Share Posted 23/11/12 08:17 PM Usually any issues with the TPS will put the car into limp mode before it allows it to lose control of the throttle...Were you going downhill? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now