RHR BOOST Moderating Team 5,698 Member For: 21y 6m Gender: Male Location: Southern Highlands NSW Posted 10/03/10 02:49 AM Share Posted 10/03/10 02:49 AM Bloody splash guard from the rear wheel arch came away from the rivit the other day. The rivit spinns but does not come out.Not the best design.Looks like the only way to get the rivet out is to take the side skirt off. Link to comment Share on other sites More sharing options...
ZAP No boost, no bottle, just my foot on the throttle! Lifetime Members 7,935 Member For: 21y 19d Gender: Male Location: Sydney Posted 10/03/10 02:54 AM Share Posted 10/03/10 02:54 AM Rob, just get some longnose plyers and pull the thing out.You can buy new ones from Fraud for $2 each. Link to comment Share on other sites More sharing options...
RHR BOOST Moderating Team 5,698 Member For: 21y 6m Gender: Male Location: Southern Highlands NSW Posted 10/03/10 03:11 AM Author Share Posted 10/03/10 03:11 AM Was worried bout using the pliers as I thought it would damage the plastic Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 9m 8d Gender: Male Location: Central Queensland Posted 10/03/10 04:48 AM Share Posted 10/03/10 04:48 AM Use a 1/8 drill and drill down the center of the rivet.. Then it will pull out easily... Link to comment Share on other sites More sharing options...
RHR BOOST Moderating Team 5,698 Member For: 21y 6m Gender: Male Location: Southern Highlands NSW Posted 10/03/10 04:50 AM Author Share Posted 10/03/10 04:50 AM I would do that but it turns in the plastic easily Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 9m 8d Gender: Male Location: Central Queensland Posted 10/03/10 08:27 AM Share Posted 10/03/10 08:27 AM (edited) Hold it with a set of vice grips, Multi grips or similar. While drilling..... Obviously holding the rear part of the rivet... Edited 10/03/10 08:29 AM by HI PSI Link to comment Share on other sites More sharing options...
RHR BOOST Moderating Team 5,698 Member For: 21y 6m Gender: Male Location: Southern Highlands NSW Posted 10/03/10 09:50 AM Author Share Posted 10/03/10 09:50 AM Cant do that either as you cant get to the back of the rivet. I was just hoping there was a quick fix/tool.What sh!ts me is that they uses the plastic screws everywhere else but not here Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 9m 8d Gender: Male Location: Central Queensland Posted 10/03/10 10:43 AM Share Posted 10/03/10 10:43 AM Well that certainly suck ass...Ummmm.. Angle grinder ???? Link to comment Share on other sites More sharing options...
RHR BOOST Moderating Team 5,698 Member For: 21y 6m Gender: Male Location: Southern Highlands NSW Posted 10/03/10 10:45 AM Author Share Posted 10/03/10 10:45 AM fark that. If it was to bite..... Link to comment Share on other sites More sharing options...
BensXR6T Member 478 Member For: 16y 1m 27d Gender: Male Location: Burpengary QLD Posted 10/03/10 11:58 AM Share Posted 10/03/10 11:58 AM Use a small amount of hot glue on the side to stick the outer rim to the body, then drill it out. The hot glue will remove from the body work with a hairdryier. Just make sure you clean everything with a bit of metho before you try and glue it.Cheers,Ben Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now