HI PSI Member 1,586 Member For: 18y 6m 1d Gender: Male Location: Central Queensland Posted 28/03/10 09:29 AM Share Posted 28/03/10 09:29 AM I do have this combo - with 19's - except when I used to work at Kings I always thought that the rears were a little too soft, so I had them make some SSLHD slightly higher load rating than normal and damn are they tight though bends, with no noticable difference in ride quality.Thanks for the advice... Would this option cost extra and would a special order have to be made to get them? My SL springs have gone a bit soft and sagged a bit... Especially the front.. So I am looking to replace them.. Link to comment Share on other sites More sharing options...
berzerker Donating Members 767 Member For: 16y 11m 5d Gender: Male Location: Brisbane Posted 28/03/10 10:00 AM Share Posted 28/03/10 10:00 AM Im not sure if theyd cost you more as I obviously got a really good deal being employed by them. If you call them to ask about them Laurie the R&D bloke will know what to make up. They were a one off prototype but should still be on the system. Ill pm you my name if you want them and they can look up the exact specs that I had.I still cant believe these never became part of the catalogue. I kept telling them how great they were. Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 9m 19d Gender: Male Location: SW Sydney Posted 28/03/10 10:18 AM Share Posted 28/03/10 10:18 AM They are part of the Cat mate, KFRL-68SSL/310 or 380 They work well for guys towing too - match them with the KFFL-57/520 fronts and the car really comes alivePat Link to comment Share on other sites More sharing options...
icer Banned 2,335 Member For: 15y 4m 9d Gender: Male Location: Aspendale, Vic. Posted 28/03/10 11:23 AM Share Posted 28/03/10 11:23 AM yeah john_K. that's with the springs settled and sitting. As I said, id recommend not SSLs on rear, but SSSLs. Link to comment Share on other sites More sharing options...
John_K Donating Members 438 Member For: 15y 11m 21d Gender: Male Location: Sydney Posted 28/03/10 12:57 PM Share Posted 28/03/10 12:57 PM Pat,What do the 310 & 380 refer to? Which would be the ideal for everyday street use? Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 9m 19d Gender: Male Location: SW Sydney Posted 28/03/10 11:28 PM Share Posted 28/03/10 11:28 PM that's the springs rates bud, 31 is perfect for everyday family duty while stil giving you a distinct improvement over the stock rates. 380 is a little firmer, but obviously has a slight edge in performance Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 6m 1d Gender: Male Location: Central Queensland Posted 29/03/10 12:30 AM Share Posted 29/03/10 12:30 AM Hey Pat, could you please give me a price including delivery to Rockhampton Queensland 4700. Regular SL's for the front and SSL (310) rears.. Thank you Link to comment Share on other sites More sharing options...
berzerker Donating Members 767 Member For: 16y 11m 5d Gender: Male Location: Brisbane Posted 29/03/10 07:26 AM Share Posted 29/03/10 07:26 AM If I remember correctly my rates were a little higher again, 415 rings a bell. Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 6m 1d Gender: Male Location: Central Queensland Posted 29/03/10 08:02 AM Share Posted 29/03/10 08:02 AM (edited) Hey Pat, could you please give me a price including delivery to Rockhampton Queensland 4700. Regular SL's for the front and SSL (310) rears.. Thank you In that case make it a set of 380 rears... What do you think Pat ??? SSSL or SSL springs???? I want it to sit level.... Edited 29/03/10 08:05 AM by HI PSI Link to comment Share on other sites More sharing options...
Andrewcoleman123 New Member 2 Member For: 10y 2m 5d Posted 29/09/14 09:54 PM Share Posted 29/09/14 09:54 PM I know I'm a few years to late but I just put kffl-57sl in front and kfrl-68ssl in the rear of my ba xr6 and it's not low enough in the back about 20mm higher than front I'm going for the sssl witch are ultras for ba witch it's suppose to be, sl and sssl are ment to go together they are ultras sl and ssl are ultra front and super low rear. It's wired but that's what it is. Don't make the same mistake I did reading all this sh*t just call a shop that specialises in king springs and ask them I've read over nearly every ba lowering forum and everyone has a different idea of what's low so just call up and do it to the hight you want around tire to gard hight is ultras for my xr6 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now