jaymen Member 57 Member For: 15y 6m 6d Gender: Male Posted 27/02/10 12:22 PM Share Posted 27/02/10 12:22 PM Hi guys just wondering if anyone has used the redback 2 1/2" Quads on there XR6T, it starts off with 2 1/2" twin pipes & tappers off each side of the car & has 4 X 2 1/2" tips,wondering what sort of power this system would be good for? Link to comment Share on other sites More sharing options...
BailZ Member 25 Member For: 17y 11m 18d Gender: Male Location: Brisbane, QLD Posted 03/03/10 03:49 PM Share Posted 03/03/10 03:49 PM I would also like to know. Link to comment Share on other sites More sharing options...
BensXR6T Member 478 Member For: 15y 10m 24d Gender: Male Location: Burpengary QLD Posted 03/03/10 09:25 PM Share Posted 03/03/10 09:25 PM (edited) I have that system fitted...it's ok, not to loud and no drone when cruising. All in all a good system unless your chasing high HP.My tuner has told me that the exhaust is at it's limit now and needs replacing.Cheers,Ben Edited 03/03/10 09:26 PM by BensXR6T Link to comment Share on other sites More sharing options...
RegSpec Cruise Control 1,417 Member For: 17y 11m 2d Gender: Male Location: Macksville NSW. Posted 03/03/10 09:25 PM Share Posted 03/03/10 09:25 PM (edited) Is it stainless or M/S? Can you give us some idea of the cost? Edited 03/03/10 09:26 PM by BionicXR6T Link to comment Share on other sites More sharing options...
BensXR6T Member 478 Member For: 15y 10m 24d Gender: Male Location: Burpengary QLD Posted 03/03/10 09:31 PM Share Posted 03/03/10 09:31 PM (edited) It's mild steel, mandrel bent, cost me $900 fitted. There is a pipe that bends over the axle to the passengers side, it has been squashed on one side so it clears the spare tyre, but as I said, they aren't a bad exhaust, nice deep note and no drone while cruizing. I'll try to get some pics of it next time I have it up on the hoist.This cat back system is coming off my car soon, PM if you're interested, it's travelled about 5,000kms.Cheers,Ben Edited 03/03/10 09:33 PM by BensXR6T Link to comment Share on other sites More sharing options...
jaymen Member 57 Member For: 15y 6m 6d Gender: Male Posted 05/03/10 12:59 AM Author Share Posted 05/03/10 12:59 AM I've heard of people getting anywhere from 338rwkw's plus with standard exhaust which is only 2 1/4" & using a Hiflow cat, while these redback Quad exhaust systems are 2 1/2" so you would think they would have to be good for atleast 360-380rwkw's with a Hiflow cat wouldn't they? As I don't really want 400 rwkw's with standard Turbo as I've heard the standard turbo are at there limits around 380-400 rwkw's,PS: How many rwkw's is you car pulling?Thanks for your replys guys. Link to comment Share on other sites More sharing options...
bagged6 Member 2 Member For: 14y 10m 14d Posted 07/03/10 01:44 AM Share Posted 07/03/10 01:44 AM hey mate id be interest in your exhaust if your selling it if its in good nic. can you get back to me please thanks. Link to comment Share on other sites More sharing options...
Godzilla Member 8 Member For: 14y 9m 8d Gender: Male Location: Roxburgh Park Melbourne Posted 07/03/10 05:57 AM Share Posted 07/03/10 05:57 AM (edited) Yes these systems are from Redback and are all mandrel bent with straight through high flow mufflers but as mentioned by Bensxr6t, one pipe on one side for the rear is a little squashed to clear around the spare wheel well. Edited 09/03/10 08:26 AM by revheadrobbo Please see forum rules Link to comment Share on other sites More sharing options...
jaymen Member 57 Member For: 15y 6m 6d Gender: Male Posted 09/03/10 01:35 AM Author Share Posted 09/03/10 01:35 AM Just had my redback Quads fitted to my XR6T today & I have to say how quite it is now.... It has a nice mild note without drawing to much attention no drowning what so ever a very good catback exhaust system for low 300-390rwkw's I couldn 't be happier, next will be an X-force 4" dump into a 3.5" Cat & twin 2 1/2" collector. Link to comment Share on other sites More sharing options...
Merlin Member 57 Member For: 21y 4m 29d Gender: Male Location: Sydney Posted 27/03/10 11:57 PM Share Posted 27/03/10 11:57 PM Given that the rear bar has a cutout on the right hand side and none on the left does this mean you have to cut the left of the rear bar to fit this exhaust? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now