xrturbomatty Member 79 Member For: 16y 10m 24d Posted 25/02/10 09:08 AM Share Posted 25/02/10 09:08 AM hey guys wondering if any1 can help me out with a step by step guide to removing the rear bumper off a xr6t ute Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 4m 30d Gender: Male Location: Perth, WA Posted 25/02/10 10:04 AM Share Posted 25/02/10 10:04 AM What model? Link to comment Share on other sites More sharing options...
xrturbomatty Member 79 Member For: 16y 10m 24d Posted 25/02/10 11:03 AM Author Share Posted 25/02/10 11:03 AM 03 xr6 turbo doesn't have reverse light in bumper Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 4m 30d Gender: Male Location: Perth, WA Posted 25/02/10 03:08 PM Share Posted 25/02/10 03:08 PM I am pretty sure the BA's still had 4 piece rear bumper. BF model has revised 3 piece.You should have:1. Main bumper section2. Rear skirt3. LHS skirt4. RHS skirtBecause the LHS and RHS skirts come around the corners and sit over the rear skirt, you have to remove them before you can remove the main bumper and rear skirt.Steps to get the bumper off;1. Remove rear mud flaps if fitted.2. Remove LHS and RHS skirts. Bolts in wheel arch, bracket at the bottom and bolted to the rear skirt.3. LHS and RHS skirts are fixed to sides of tray and rear skirt with automotive exterior trim adhesive, you will need to cut them away slowly. Do not yank on them as they will bend and break.4. Once the RHS and LHS skirts are off, remove the tail lights. Drop tailgate and remove two bolts in each light and pull them out towards rear.5. To remove rear bumper and skirt together you are best removing them with bumper support attached to bumper. Look through the top where the lights used to sit and you will see the support bar is bolted to the tray (2 bolts each side). Undo the bolts and the bumper should slide off towards rear. You may need to go from under the car to get to the bolts. Don't forget to disconnect the number plate lights.6. Once you got the rear bumper off, separating the rear skirt should be self explanatory.These bumpers are a PITA and stupid design. As soon as I come across a BF bumper I will be converting mine.Hope that helps. Link to comment Share on other sites More sharing options...
xrturbomatty Member 79 Member For: 16y 10m 24d Posted 25/02/10 09:55 PM Author Share Posted 25/02/10 09:55 PM cheers mate I saw the glue on the side skirts looks like a lot of fun getting them off do u have to re glue them on Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 4m 30d Gender: Male Location: Perth, WA Posted 26/02/10 12:31 AM Share Posted 26/02/10 12:31 AM Yes you do. Get some Sikaflex-221 from Bunnings. Link to comment Share on other sites More sharing options...
xrturbomatty Member 79 Member For: 16y 10m 24d Posted 28/02/10 12:47 AM Author Share Posted 28/02/10 12:47 AM is there an easy way to cut the side skirts off been trying for ages the glue is really hard to cut through the top of the skirt seems free but just wont come off Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now