Plugg3r Caring Understanding Northern Territorian Member 159 Member For: 16y 3m 30d Gender: Male Location: Darwin, NT Posted 08/02/10 01:33 AM Share Posted 08/02/10 01:33 AM Hey Guys,Upgraded my turbo to a .70 housing etc but now the issue arises with stock crossover, I have a pod filter sitting at home that can go on the front of the mouth but then how do I block of the crossover hole? What have people been using?Or has anyone made a bigger turbo piping to crossover for this kind of mod?Thanks. Link to comment Share on other sites More sharing options...
Dirty32 Legendary member!! Donating Members 1,739 Member For: 17y 9m 12d Gender: Male Location: Dianella, West Oz Posted 08/02/10 03:31 AM Share Posted 08/02/10 03:31 AM Invest in a good piping system mate... Shortening the inlet tract is great for response too!Sounds like you already have a decent intake / cooler, but if your not happy, id look at upgrading to a full intake / cooler system from Plazmaman / RAP1D / Process West / Nizpro.Can I ask why you upgraded the compressor cover when you are still utilising the stock crossover?Doesnt the .70 A/R cover have a 4 inch inlet? How have you connected the stock crossover to turbo pipe with this in mind? Link to comment Share on other sites More sharing options...
DCVNXR Member 28 Member For: 16y 1m 1d Gender: Male Posted 08/02/10 08:25 AM Share Posted 08/02/10 08:25 AM could try enzed or someone for a fitting, otherwise you might be able to just unplug you blow off valve and plug it up if your not runnin to much boost. Link to comment Share on other sites More sharing options...
Plugg3r Caring Understanding Northern Territorian Member 159 Member For: 16y 3m 30d Gender: Male Location: Darwin, NT Posted 10/02/10 12:39 AM Author Share Posted 10/02/10 12:39 AM Yeh I wasnt aware of the 4inch inlet at the time of buying, looked into everything except what I should of looked into.Atm im going to use the pod filter straight out of the mouth. When I get some cash together I suppose I'll use a new crossover... Whats everyone using with the modified turbo etc? Link to comment Share on other sites More sharing options...
Dirty32 Legendary member!! Donating Members 1,739 Member For: 17y 9m 12d Gender: Male Location: Dianella, West Oz Posted 10/02/10 05:10 AM Share Posted 10/02/10 05:10 AM I would say for those have modded the stock turbo or upgraded, they will have an airbox / pod / intake pipe straight to the turbo.I would also say for those that have modded the stocker or upgraded turbo's - the stock crossover is loooooooooooong gone!Again, you need to invest in some custom piping for your HDI cooler, or upgrade to a good full intake system by one of the sponsors that have been mentioned above.Again, iv got to ask - what made you upgrade the compressor housing?? Link to comment Share on other sites More sharing options...
Plugg3r Caring Understanding Northern Territorian Member 159 Member For: 16y 3m 30d Gender: Male Location: Darwin, NT Posted 11/02/10 12:08 AM Author Share Posted 11/02/10 12:08 AM I upgraded the compressor housing due to new turbo system as old one died.So bought new system which was high flowed with the bigger housing etc.Which sponsors also do full intake systems? Link to comment Share on other sites More sharing options...
Dirty32 Legendary member!! Donating Members 1,739 Member For: 17y 9m 12d Gender: Male Location: Dianella, West Oz Posted 11/02/10 12:32 AM Share Posted 11/02/10 12:32 AM Sounds like you already have a decent intake / cooler, but if your not happy, id look at upgrading to a full intake / cooler system from Plazmaman / RAP1D / Process West / Nizpro./quote] Link to comment Share on other sites More sharing options...
Plugg3r Caring Understanding Northern Territorian Member 159 Member For: 16y 3m 30d Gender: Male Location: Darwin, NT Posted 11/02/10 05:14 AM Author Share Posted 11/02/10 05:14 AM Know if any have the 4" turbo mouth Link to comment Share on other sites More sharing options...
Dirty32 Legendary member!! Donating Members 1,739 Member For: 17y 9m 12d Gender: Male Location: Dianella, West Oz Posted 11/02/10 05:33 AM Share Posted 11/02/10 05:33 AM Yeh, the 4" intake kit / Airbox / Battery relocation from RAP1D.The silicon joiner from the 4" pipe does join up to the standard 3" compressor cover inlet.You may need to request a straight 4" joiner, im not sure.I have this intake.You will need to get rid of the stock crossover to utilise this!Let me know how you go, would be interested to see if it needs a 4" joiner. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now