tray_182005 Member 1,226 Member For: 15y 5m 26d Gender: Male Location: Wee Waa/NSW Posted 05/02/10 10:57 PM Share Posted 05/02/10 10:57 PM Cause they r fully sick mae lol. When I went to Thailand for a honeymoon. Every car was riding on brembos . I thought god they must be cheap or fake like every thing else over there. Then I went an had a closer look and they were the cover lol Link to comment Share on other sites More sharing options...
Rudiger All round good guy! Lifetime Members 1,122 Member For: 16y 8m 24d Gender: Male Location: Greenvale, Victoria Posted 06/02/10 05:58 AM Author Share Posted 06/02/10 05:58 AM lol. I've never seen them but I suppose that's the magic of them. WHo'd know unless you had a good look? lol. Link to comment Share on other sites More sharing options...
Rosie Member 361 Member For: 17y 9m 26d Posted 06/02/10 06:25 AM Share Posted 06/02/10 06:25 AM What size Rotors do you have front and back?I have 362mm AP Rotors with AP Six spots on the front and 300mm Rotors with AP 4 spots at the rear.- They have never tried to turn me around at the Track! Link to comment Share on other sites More sharing options...
bcl Toughest BA Turbo Lifetime Members 3,408 Member For: 22y 1m 9d Gender: Male Location: Sydney Posted 06/02/10 07:35 AM Share Posted 06/02/10 07:35 AM No problems here:Alcons 6/4 on the BA F6; Factory Brembo 6/4 on the BF F6; plenty of stops at over 130mph (210+ kph) at the track, and kept straight every time.Brian Link to comment Share on other sites More sharing options...
tray_182005 Member 1,226 Member For: 15y 5m 26d Gender: Male Location: Wee Waa/NSW Posted 06/02/10 09:52 AM Share Posted 06/02/10 09:52 AM What size rotors r u runnig Brian ? Link to comment Share on other sites More sharing options...
bcl Toughest BA Turbo Lifetime Members 3,408 Member For: 22y 1m 9d Gender: Male Location: Sydney Posted 06/02/10 10:58 AM Share Posted 06/02/10 10:58 AM BA with Alcons are 355 front & 330 rear. From memory there is a 375mm option, but you'll need 19" wheels and spare.BF has DBA slotted ... I think factory size.Alcons definitely pull up better. Brian Link to comment Share on other sites More sharing options...
Rudiger All round good guy! Lifetime Members 1,122 Member For: 16y 8m 24d Gender: Male Location: Greenvale, Victoria Posted 06/02/10 11:01 AM Author Share Posted 06/02/10 11:01 AM They are 355mm front and back.I'll have a play tomorrow and see. May have just been the road. Bl**dy Werribee Council. How dare they build roads not suited for heavy braking at 140+ Link to comment Share on other sites More sharing options...
Rosie Member 361 Member For: 17y 9m 26d Posted 06/02/10 09:33 PM Share Posted 06/02/10 09:33 PM It's 'possible' you are over braked at the back end!Bigger Rotors on the front and smaller Rotors on the back 'may' be more effective with your Calipers!The fronts do most of the work!My rear Rotors and Pads last 'heaps' longer than the fronts! Link to comment Share on other sites More sharing options...
tray_182005 Member 1,226 Member For: 15y 5m 26d Gender: Male Location: Wee Waa/NSW Posted 06/02/10 10:22 PM Share Posted 06/02/10 10:22 PM They are 355mm front and back.I'll have a play tomorrow and see. May have just been the road. Bl**dy Werribee Council. How dare they build roads not suited for heavy braking at 140+Make sure u get the photo up asap Link to comment Share on other sites More sharing options...
Rudiger All round good guy! Lifetime Members 1,122 Member For: 16y 8m 24d Gender: Male Location: Greenvale, Victoria Posted 08/02/10 10:31 AM Author Share Posted 08/02/10 10:31 AM Think I worked it out.I was heavy braking with the ZF transmission in perf mode. Mine changes down aggressively under braking and I think when I brake hard Im getting aome compression lock up.Anyway, I havent had a change to do some stops. Took it on the Otwats run yesterday and did some very quick runs through some turns with a super powered FG up my clacka. He ran out of brakes and I had not a touch of fade and it was stopping where I wanted it too so, so far so good.Whats a set of pads average fro 6 pot Front Brembos? Anyone? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now