millzy555 Member 42 Member For: 15y 1m 15d Posted 01/02/10 05:08 AM Share Posted 01/02/10 05:08 AM G'day all, I have searched just about every thread on this website and a few others without getting a definitive answer....is there a limit to which the stock clutch (BF xr6t) can handle? I'm about to plan some mods and its either going to be a mal wood Opt 3 clutch or a custom tune....but will the stock clutch sh*t itself with say 260rwkw?, or again is this a tuning issue, do I run the stock clutch into the ground....bearing in mind it only sees 4000rpm once or twice a weekany help would be greatthanks jordan Link to comment Share on other sites More sharing options...
seduced Need more power. Now taking donations. Member 753 Member For: 15y 8m 26d Gender: Male Posted 01/02/10 06:20 AM Share Posted 01/02/10 06:20 AM The stock clutch will only handle about 240-250rwkw tops. Anything over that and you will have slipping issues....and it wont be at 4000rpm, usually it appears as it comes on boost 3k and upwards.grab a mal wood option3, it will be the best $2k you will spoend. Link to comment Share on other sites More sharing options...
ENVYOSXR Loves boost Donating Members 266 Member For: 15y 5m 21d Gender: Male Location: VIC Posted 01/02/10 12:40 PM Share Posted 01/02/10 12:40 PM I have been running the stock clutch since August with 310RWKW's, how long the clutch lasts depends on how you treat it. Mine started slipping on the trip home from the tuners and its still going, I have just had a hard time finding the time to get the new clutch in, I am going with a Mal Wood Opt3 heard only good things about them so can't go wrong. Link to comment Share on other sites More sharing options...
Busson Member 22 Member For: 16y 2m 30d Gender: Male Location: Perth SOR Posted 01/02/10 01:00 PM Share Posted 01/02/10 01:00 PM I've been running the stock clutch for about 5000km's with 290rwkw, no problems, just treat it well and don't do hard changes Link to comment Share on other sites More sharing options...
seduced Need more power. Now taking donations. Member 753 Member For: 15y 8m 26d Gender: Male Posted 02/02/10 12:41 AM Share Posted 02/02/10 12:41 AM I had an aggressive tune at 250rwkw that used to come on boost real hard at 3k. It would slip 4th, 5th, 6th gears at wot everytime. It couldnt ever do hard launches, it would just give up... when I say hard, im only talking 2-3krpm and gently drop the clutch. Im not talking about dropping huge skids or 1/4 mile launches. just a harder than normal street launch.but, some clutches are better than others, it is well known that the stock one is too weak though. depends on your driving style. Link to comment Share on other sites More sharing options...
millzy555 Member 42 Member For: 15y 1m 15d Posted 02/02/10 01:28 AM Author Share Posted 02/02/10 01:28 AM Cheers for the replies, I dont do hard changes or dump it, so will results like those, a mild tune might be in order, thanks again Link to comment Share on other sites More sharing options...
boosted_XR Member 364 Member For: 16y 4m 8d Posted 02/02/10 04:06 AM Share Posted 02/02/10 04:06 AM I was running a stock clutch with 268rwkw and it was fine, cop a beating at times too. Just depends how you treat it I guess. Link to comment Share on other sites More sharing options...
HID XR Member 99 Member For: 15y 10m 20d Gender: Male Posted 02/02/10 05:55 AM Share Posted 02/02/10 05:55 AM if you look a the patten that is happing with this post the car that have been tune have clutchs that are slipping or they can't drive them hard just fit the Mal Wood Opt3 no point have power if you can't use it steve Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now