11.2 To 10.9

[ratter]

You need to improve your 60 ft time, a tenth of a second in the the 60 ft will normally equal 2 tenths in the top end.

You could try shallow staging to see if that will help im prove your times.

Your mph should be good for a 10 for sure, you need to get the car moving quicker, you could up your boost down low to help this but the driveling will become the weak link with more power and good grip.

[shananp]

what power were you running with the 11.2?

402rwkw

Where can I get a stronger tailshaft from ?

[STICKS]

man I can get over 3000 rpm with my fg xr6t, too bad calder it wouldnt hook lol 13.4 that day, u need to do a few tricks to get ther though with the software,

Hey that other green ute that ran 13.00 what did it have done to it do u know?

[power_slide]

Just have some spare cash incase you destroy the tailshaft when u boost it off the startline. Other than that wait till its cooler see what the weather is like in 2 weeks at calder, it might be alot cooler.

Talk to spoolman about launching methods as his f6 does 1.6 60ft, his on here but moreso on fordforums.com.au

How much cash would you need for the tail shaft

[shananp]

You need to improve your 60 ft time, a tenth of a second in the the 60 ft will normally equal 2 tenths in the top end.

You could try shallow staging to see if that will help im prove your times.

Your mph should be good for a 10 for sure, you need to get the car moving quicker, you could up your boost down low to help this but the driveling will become the weak link with more power and good grip.

Whats shallow staging ?

[xr6t_ute]

How much cash would you need for the tail shaft

I know for a std one a friend twisted one in a fg. cost was $800

[envyxr]

How much cash would you need for the tail shaft

I spoke to Mal wood the other day and to build a tuff cromemoly tail shaft with all the fruit just under $2500