Tocchi Sandtrap Motorsport Donating Members 2,055 Member For: 16y 1m 1d Gender: Male Location: Perth Posted 01/02/10 03:38 AM Share Posted 01/02/10 03:38 AM looks good fitted I still havent been able to fit mine (as the car is at the gearbox workshop) ... now im wanting back asap so I can fit the manifold. hahaill be modifying my rail to be duel feed (both ends) and get a fitted welded in the mid section of the rail for the fuel reg line. 1 Link to comment Share on other sites More sharing options...
Guest EGOXRT Guests Posted 01/02/10 03:54 AM Share Posted 01/02/10 03:54 AM Hey Matt.You will also have to modify the water pipe that exits the thermostat housing.Your application will be far different to mine mate.. Link to comment Share on other sites More sharing options...
Tocchi Sandtrap Motorsport Donating Members 2,055 Member For: 16y 1m 1d Gender: Male Location: Perth Posted 01/02/10 04:50 AM Share Posted 01/02/10 04:50 AM already modified... as its fully removed did you get a dyno sheet of prior to the plenum?would be interesting to overlay one over the other to get a comparision of response, boost control, afr's etc Link to comment Share on other sites More sharing options...
Guest EGOXRT Guests Posted 01/02/10 05:55 AM Share Posted 01/02/10 05:55 AM I have a dyno sheet, but no AFR's on it. Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 5m 18d Gender: Male Location: OZ Posted 02/02/10 06:47 AM Share Posted 02/02/10 06:47 AM Sensational. I like the factory rail look and it suits your goal of the factory look obviosuly. Here's an alternative....not so standard look. Pricey too Atomic Performance Parts - Performance through innovation - Link to comment Share on other sites More sharing options...
Guest EGOXRT Guests Posted 02/02/10 07:03 AM Share Posted 02/02/10 07:03 AM I have seen that option mate, I almost had a chronic.. You still still an adapter to suit the BA throttle body with that. What he supplies is for a cable operated 80mm TB. You can buy a billet BA rail for $300 and make up some legs to suit, or wait for PW to release his, plus the manifold from Ford for $600 and have plenty of change.I will get around to pricing the the conversion soon, it will be much less than that.. Link to comment Share on other sites More sharing options...
Tocchi Sandtrap Motorsport Donating Members 2,055 Member For: 16y 1m 1d Gender: Male Location: Perth Posted 02/02/10 01:47 PM Share Posted 02/02/10 01:47 PM Sensational. I like the factory rail look and it suits your goal of the factory look obviosuly. Here's an alternative....not so standard look. Pricey too Atomic Performance Parts - Performance through innovation -costs $1450 Link to comment Share on other sites More sharing options...
Guest EGOXRT Guests Posted 02/02/10 01:53 PM Share Posted 02/02/10 01:53 PM 306901 Manifold, Viper Ford DOHC 6 $1,540.00 Atomic Viper intake manifold suit DOHC ford 6 cyl engine Link to comment Share on other sites More sharing options...
Tocchi Sandtrap Motorsport Donating Members 2,055 Member For: 16y 1m 1d Gender: Male Location: Perth Posted 03/02/10 01:18 AM Share Posted 03/02/10 01:18 AM still has all the ford markings on it too think they could of took all the castings off to make it look smooth Link to comment Share on other sites More sharing options...
ab_futura Member 21 Member For: 17y 6m 6d Gender: Male Posted 25/02/10 01:01 PM Share Posted 25/02/10 01:01 PM Any updates? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now