cobramad Member 824 Member For: 19y 4m 15d Gender: Male Location: Perth Posted 09/04/12 12:44 PM Share Posted 09/04/12 12:44 PM Your local stealer (dealer..) should be able to give you a part # for the manifold. I bought mine off a forum member who had contacts at Ford. It needed a little tidying up as it turned out to be a prototype manifold, without any part nos. on it but has worked flawlessly on my Territory turbo. A standard FG fuel rail also lined up perfectly (make sure you use the correct fuel pressure regulator) with 5mm spacers to match the Siemens Deka 60lb injectors I used.People have used this manifold, in standard spec, to make over 600rwkw so its not bad and if you find it second hand, a cheap way to make good power. Hope this helps you a bit.Cheers. Link to comment Share on other sites More sharing options...
orangeute338 Suspended 260 Member For: 16y 4m 4d Gender: Male Posted 09/04/12 12:44 PM Share Posted 09/04/12 12:44 PM theres a place that sells the manifold and fuel rail to suit ba bf do a google search...otherwise check out ebay you might get lucky and pick up a manifold cheap Link to comment Share on other sites More sharing options...
allmtr Member 512 Member For: 15y 8m 26d Gender: Male Location: Newcastlish Posted 09/04/12 02:59 PM Share Posted 09/04/12 02:59 PM Your local stealer (dealer..) should be able to give you a part # for the manifold. I bought mine off a forum member who had contacts at Ford. It needed a little tidying up as it turned out to be a prototype manifold, without any part nos. on it but has worked flawlessly on my Territory turbo. A standard FG fuel rail also lined up perfectly (make sure you use the correct fuel pressure regulator) with 5mm spacers to match the Siemens Deka 60lb injectors I used.People have used this manifold, in standard spec, to make over 600rwkw so its not bad and if you find it second hand, a cheap way to make good power. Hope this helps you a bit.Cheers.Thanks, yeah I'll try a dealer when I get a chance. A mate might be able to get me dealer pricing and was after the part number to check. Link to comment Share on other sites More sharing options...
allmtr Member 512 Member For: 15y 8m 26d Gender: Male Location: Newcastlish Posted 15/05/12 12:08 PM Share Posted 15/05/12 12:08 PM Ordered my FG manifold today from Fraud. Going with the Plazmaman fuel rail. I think I'll weld up the manifold and drill/tap the TB holes to avoid the adapter issues Link to comment Share on other sites More sharing options...
allmtr Member 512 Member For: 15y 8m 26d Gender: Male Location: Newcastlish Posted 16/05/12 01:23 PM Share Posted 16/05/12 01:23 PM Anyone know if BA/BF throttle bodies are the same diameter as FG? ie if I fit a BF TB to the FG manifold, will I be able to use an FG aftermarket elbow? Link to comment Share on other sites More sharing options...
jayjaybrid Member 98 Member For: 13y 5m 10d Gender: Male Location: Albury Posted 16/05/12 05:39 PM Share Posted 16/05/12 05:39 PM how much did ford sting ya ? Link to comment Share on other sites More sharing options...
allmtr Member 512 Member For: 15y 8m 26d Gender: Male Location: Newcastlish Posted 17/05/12 07:45 AM Share Posted 17/05/12 07:45 AM I got dealer pricing so was around $550Ordered a BF TB gasket today so I can figure out the best way to adapt it to the FG manifold, should be in tomorrow 1 Link to comment Share on other sites More sharing options...
allmtr Member 512 Member For: 15y 8m 26d Gender: Male Location: Newcastlish Posted 18/05/12 04:04 AM Share Posted 18/05/12 04:04 AM BF throttle body gasket on FG manifoldProbably going to weld up old bolt holes and drill/tap new ones. I was surprised the bore is bigger on the BF Link to comment Share on other sites More sharing options...
Shyfrd Turboless Donating Members 5,992 Member For: 13y 9m 6d Gender: Male Location: Geelong, Victoria Posted 18/05/12 04:18 AM Share Posted 18/05/12 04:18 AM Interbreasting. Link to comment Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 6m 7d Gender: Male Location: Melbourne Posted 18/05/12 04:41 AM Share Posted 18/05/12 04:41 AM 550 is pretty good, better then B series but wonder how it compares to an aftermarket plenum? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now