Sparkplugs - Which Ones

[Impellor]

I have gone down QIK1's path, and use the NGK BKR6E's. Pregapped to 0.8mm and are $4.50 each. I figured if they were working well with 735 RWKW's they would be OK on mine.

Cheers

[Steven87]

What's the difference between the NGK BKR6EIX and the NGK BKR6EIX-11

[freeze_dk]

11 is the gap

[jas98]

so a stock ba xr6t should have a 1.1mm gap? as that's what he ford plugs are???

[Mr_4.0]

I would still run 0.8 or 0.9 in a stock xr6t

[jas98]

Awsum, thanks. I got told to keep it at 1.1, but I keep reading to go a bit lower.

so what benifits does this have on a stock engin?

[Paulie2256]

Coils wont have to work as hard but you will have a smaller spark.

[JETURBO]

Idle gets worse the smaller u go but brighter spark for more boost

[jas98]

so on mine which is stock xr6t ba should I stick to the 1.1mm or go say .9mm?

[KeddyXR6T]

^^ read the post all the way thru you will find your answer is yes the 0.8 is fine for edited an non edited XR 6 T's ^^

Nothing against eBay but $1.50 extra to get them from store make's me feel better then having no idea where they came from (stored incorrectly ect ect$