Good Knowledgable And Honest Qld Workshop

[BensXR6T]

There is also RDP Motorsport, they are at Redcliffe and Mackay. Had my BA tuned there and 42lb injectors fitted and the guys there are very informative and professional.

They use a mainline dyno, so your power figures won't be as high on paper as they would be with a dyno dynamics and they quote their power in RWHP.

Their prices are very reasonable and they will back up their work. Give Lee a call at the Redcliffe workshop and he will help you out with any questions you may have without any pressure selling tactics, he is just a genuine car lover.

Good luck

Ben

Edited 21/12/09 09:54 PM by BensXR6T

[d rangd]

Its being tuned by Chiptorgue , Have replaced Nispro I cooler and Garrett for Turbonetics 850 and Process west stage 3 and added 20 KWs on 109 . Have 2 pumps now , but need to got to 80 lb injectors and better map sensor as maxed out( 5 volt ) at 23lb boost.

Spoke to Mal re magnum 6 speed , chrome moly talshaft and new diff centre.

Am looking for roll cage as using for track work .

for any exhaust or fabrication work I have nothing but good to say about exhaust innovations in capalaba..he did my exhaust and I got quoted 3200 for a full moly cage for mine. his work is extremely good quality, but you do pay for it!

[bluprinturbo]

definately see dave at mackay.pick of the crop by far.

[Dirty32]

From all reports, Dave (Blueboost) is one of the best tuners in the country - and that filters all the way back to WA!

For a car making power like yours and being set up for the strip/track, I dare say he is the man to see.

[yellowtyphoon]

Just picked it up after 3 stinking months at the shop. New 850 Turbonetics Turbo from John Patrick in Townsville and new Intercooler from Process west. Now have 2 BOVs one on either side of the Intercooler , heaps of heatwrap ,and 2 XA GT scoops in the bonnetfor cooling under the bonnet..

Having 18 by 8.5 and 18 by 10 Enkei GTC and semislicks fitted tomorrow.

Will have to save up and go and see Mal Wood for Gearbox, tailshaft and Diff.

On Redcliffe Dyno , there were a few problems before . They have changed owners ?

Am looking at competition seats and rollcage can any one help on that as in who to see ? What are the rules on roadworthy and Rollcages ??

[Guest XR09]

It's a bit of a grey area. If you fit one it has to have an engineers cert. A blue plate.

I think there is a place in bris.... Redline Racecars & RollcagesHart St, Bundamba QLD 4304(07) 3816 0220‎ I think they will be able to give you what you need.

ps dont try to read the qld transport mod guide. It just does your head in.

Edited 23/12/09 01:19 PM by XR09
over quote

[BensXR6T]

Steve doesn't own RDP anymore. They still fly under RDP but have changed the name to Real Dyno Performance and are in no way affiliated the Redcliffe Dyno.

I think they tune more on the safe side of things, my '04 BA made 335rwhp on 9psi, only mods are 42lb bosch injectors, K&N filter and cat back exhaust. Did have a problem when they initially tuned it with the 1st to 2nd shift flaring, but that was fixed up no questions asked, so they guarantee their work which is great.

Cheers,

Ben

[yellowtyphoon]

It's a bit of a grey area. If you fit one it has to have an engineers cert. A blue plate.

I think there is a place in bris.... Redline Racecars & RollcagesHart St, Bundamba QLD 4304(07) 3816 0220‎ I think they will be able to give you what you need.

ps dont try to read the qld transport mod guide. It just does your head in.

Thanks for that , I was also told KVs at Maroochydore does rollcages to andra rules , regards

[Superdan]

New 850 Turbonetics Turbo from John Patrick in Townsville and new Intercooler from Process west. Now have 2 BOVs one on either side of the Intercooler , heaps of heatwrap ,and 2 XA GT scoops in the bonnetfor cooling under the bonnet..

I think I speak for us all when I say...

MORE PICS!!!!!!!

[tab]

Now have 2 BOVs one on either side of the Intercooler

Stupid question....but why's that?