E.ZTRBO Member 53 Member For: 15y 5m 22d Gender: Male Location: Geelong Posted 16/12/09 06:35 AM Share Posted 16/12/09 06:35 AM G'day all,Just wondering if anyone talked there dealer into throwing a pair of brembo's into the deal when they bought there g6et?If so how much did you pay and who did you go about it I asked about it but the dealer I was going through was real knob and just said that only fpv's could be optioned with them.But I dont see the problem if yours is getting built and your willing to pay.. Link to comment https://www.fordxr6turbo.com/forum/topic/64376-brembos-for-g6ets/ Share on other sites More sharing options...
Buf-Phoon loitering with intent Lifetime Members 13,318 Member For: 21y 8m 11d Gender: Male Location: Zombie Birdhouse Posted 16/12/09 06:43 AM Share Posted 16/12/09 06:43 AM Go aftermarket if you can , much cheaper. Ford tried to rip me for $2.5k for just front rotors and pads. I replaced those components for less than half that amount Link to comment https://www.fordxr6turbo.com/forum/topic/64376-brembos-for-g6ets/#findComment-963640 Share on other sites More sharing options...
RAP1D Member Donating Members 3,739 Member For: 18y 11m 11d Gender: Male Location: Sydney NSW Posted 16/12/09 06:43 AM Share Posted 16/12/09 06:43 AM They dont fit under the stock 18s, and was told same for the 19s, so you'd have to get FPV spec wheels too. But yeah be nice if Brembos were a factory option. Link to comment https://www.fordxr6turbo.com/forum/topic/64376-brembos-for-g6ets/#findComment-963641 Share on other sites More sharing options...
bunna Donating Members 813 Member For: 18y 8m 5d Posted 21/12/09 12:16 PM Share Posted 21/12/09 12:16 PM (edited) But I dont see the problem if yours is getting built and your willing to pay..You're joking right? The most glaring issue is that there isn't a rim that'll fit over the bloody things fitted in plant, so Ford would have to send the car out with slave wheels on, or send it to FPV for them to deal with it, then there's the retraining of operators, countless adjustments to the production systems, adjustments to the bill of materials for that individual car (ridiculous), and don't forget contact with suppliers to ensure the appropriate level of parts is maintained throughout the supply chain. Oh and assuming you're asking for 6 pot fronts who's going to fit the front upper arm washers that address the vibration issues with brembo 6 pots?Just slap em on ay? Edited 21/12/09 12:17 PM by bunna Link to comment https://www.fordxr6turbo.com/forum/topic/64376-brembos-for-g6ets/#findComment-965143 Share on other sites More sharing options...
Guest Guests Posted 21/12/09 10:29 PM Share Posted 21/12/09 10:29 PM I sold a set of brakes to a guy who had his dealer fit them, he also had them fit his new wheels and exhaust before it was collected aswell so that he could get finance for mods aswell. Link to comment https://www.fordxr6turbo.com/forum/topic/64376-brembos-for-g6ets/#findComment-965194 Share on other sites More sharing options...
bunna Donating Members 813 Member For: 18y 8m 5d Posted 22/12/09 03:54 AM Share Posted 22/12/09 03:54 AM Dealer fit - says it all in 2 words.all cranky pants late night posts aside, I reckon we should have em as an option, and we do now with the latest police XR6Ts (4 pot brembos with BA typhoon rims).I certainly would've ticked the box! Link to comment https://www.fordxr6turbo.com/forum/topic/64376-brembos-for-g6ets/#findComment-965250 Share on other sites More sharing options...
Guest XR09 Guests Posted 22/12/09 04:20 AM Share Posted 22/12/09 04:20 AM Noooooooooo now my brain hurtsWe all poo poo ford for being to dear on thier accessories. Then we shoite on them cause they don't build the T to FPV spec's. ????WTF. You want to buy them off ford, so you can pay a huge premium to get them off ford, then come on here and winge about being ripped off!!!!!!!!!!!!Think we all need to get laid more often. lolYou have to put mags on your car to make it your own for mine. And to keep the originals pristine.Plenty of good shops on this site will do it for you for less than Ford.No brainer.BTW I have driven one with 4 pots front and rear. Perfect ! And at least a free case of beer in the fridge at new pad time.Yep Ford and there dealers can be a pain but this is just ridiculous. Link to comment https://www.fordxr6turbo.com/forum/topic/64376-brembos-for-g6ets/#findComment-965256 Share on other sites More sharing options...
E.ZTRBO Member 53 Member For: 15y 5m 22d Gender: Male Location: Geelong Posted 23/12/09 05:02 PM Author Share Posted 23/12/09 05:02 PM You're joking right? The most glaring issue is that there isn't a rim that'll fit over the bloody things fitted in plant, so Ford would have to send the car out with slave wheels on, or send it to FPV for them to deal with it, then there's the retraining of operators, countless adjustments to the production systems, adjustments to the bill of materials for that individual car (ridiculous), and don't forget contact with suppliers to ensure the appropriate level of parts is maintained throughout the supply chain. Oh and assuming you're asking for 6 pot fronts who's going to fit the front upper arm washers that address the vibration issues with brembo 6 pots?Just slap em on ay?Ouch!!Sorry mate you see I have only been seriously into the car scene for a little over a year now and where not born with the knowledge of brembo's so at some stage in out life's we ask or are taught about such subjects and then we retain this information.Considering I thought everyone on here was here to learn or talk in a friendly place I thought I would ask so sorry for doing so ill wait till someone bring the subject to save coping stick as I don't know or claim to be very educated in all things in the car scene.but to the rest of you that answered thanks I have learn;t from it and walked away with what I came on here from the first place... ANSWERS!!! so chill with the ego dude I'm in my early twenties and have no mates into cars only my dad who brought me up on old cars and he ain't here no more so RELAX Link to comment https://www.fordxr6turbo.com/forum/topic/64376-brembos-for-g6ets/#findComment-965707 Share on other sites More sharing options...
E.ZTRBO Member 53 Member For: 15y 5m 22d Gender: Male Location: Geelong Posted 23/12/09 05:07 PM Author Share Posted 23/12/09 05:07 PM (edited) And as it seems a few people not just on here and the new dealer I'm going through have had this done if your willing to order in the fpv rims. Just had to find the right dealer willing to go that extra mile for the sale..And I'm glad I made such a stupid post as I have know gained some knowledge which I can pass on and retain and also have been contacted by another member who can supply the 6 pot and 4 pot front and rear's for a awesome price which fits my budget and another has kindly given me a list of wheels he has known to fit over the brembo's not just fpv so that will also send me in the right direction next year.. And next time you read a post of mine and as you will find there usually in the asking a question range just ignore it as you will find they me be a little stupid but I guess at some stage we were all there true? I'm slowly learning and I have found that 99% of people on here answer with great knowledge and attitude so thanks guys merry xmas and drive safe.. Edited 30/01/10 02:55 AM by Dagabond Link to comment https://www.fordxr6turbo.com/forum/topic/64376-brembos-for-g6ets/#findComment-965708 Share on other sites More sharing options...
captain Member 23 Member For: 15y 4m 17d Gender: Male Location: melbourne victoria Posted 23/12/09 10:53 PM Share Posted 23/12/09 10:53 PM You're joking right? The most glaring issue is that there isn't a rim that'll fit over the bloody things fitted in plant, so Ford would have to send the car out with slave wheels on, or send it to FPV for them to deal with it, then there's the retraining of operators, countless adjustments to the production systems, adjustments to the bill of materials for that individual car (ridiculous), and don't forget contact with suppliers to ensure the appropriate level of parts is maintained throughout the supply chain. Oh and assuming you're asking for 6 pot fronts who's going to fit the front upper arm washers that address the vibration issues with brembo 6 pots?Just slap em on ay?You do get cranky late at night dont you Bunna ?does this mean that the 19s that I got with my New XR6T will not fit over even 4 pot brebos? Captain Link to comment https://www.fordxr6turbo.com/forum/topic/64376-brembos-for-g6ets/#findComment-965748 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now