R-SPEC You are a dead set goose Silver Donating Members 3,968 Member For: 19y 6m 13d Gender: Male Location: Melbourne Posted 21/12/09 06:55 AM Share Posted 21/12/09 06:55 AM Haydn put the 20" Dark Argents on and now has a full retune. Final dyno figures to come. Looks pretty sweet! Link to comment https://www.fordxr6turbo.com/forum/topic/64265-haydns-rebuild/page/4/#findComment-965001 Share on other sites More sharing options...
icer Banned 2,335 Member For: 15y 10m 26d Gender: Male Location: Aspendale, Vic. Posted 21/12/09 09:08 AM Share Posted 21/12/09 09:08 AM reach 400rwkw mark? ???? :D Link to comment https://www.fordxr6turbo.com/forum/topic/64265-haydns-rebuild/page/4/#findComment-965049 Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 18y 17d Gender: Male Location: Melbourne Posted 21/12/09 10:02 AM Share Posted 21/12/09 10:02 AM Damn! Loose the wing and that would just finish it off I think, yeah I know it's an F6 but still... Link to comment https://www.fordxr6turbo.com/forum/topic/64265-haydns-rebuild/page/4/#findComment-965082 Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 18y 9m 22d Gender: Male Location: Melbourne, VIC Posted 21/12/09 10:10 AM Share Posted 21/12/09 10:10 AM Kind agree with Dillz.. maybe try a bobtail or lip spoiler... Link to comment https://www.fordxr6turbo.com/forum/topic/64265-haydns-rebuild/page/4/#findComment-965089 Share on other sites More sharing options...
Headsex Donating Members 2,528 Member For: 19y 10m 1d Gender: Male Location: Melb Posted 21/12/09 11:39 AM Author Share Posted 21/12/09 11:39 AM do not loose the wing! Link to comment https://www.fordxr6turbo.com/forum/topic/64265-haydns-rebuild/page/4/#findComment-965127 Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 18y 17d Gender: Male Location: Melbourne Posted 21/12/09 11:51 AM Share Posted 21/12/09 11:51 AM Link to comment https://www.fordxr6turbo.com/forum/topic/64265-haydns-rebuild/page/4/#findComment-965134 Share on other sites More sharing options...
R-SPEC You are a dead set goose Silver Donating Members 3,968 Member For: 19y 6m 13d Gender: Male Location: Melbourne Posted 21/12/09 11:09 PM Share Posted 21/12/09 11:09 PM lolLeave the wing f*ckers! Link to comment https://www.fordxr6turbo.com/forum/topic/64265-haydns-rebuild/page/4/#findComment-965195 Share on other sites More sharing options...
nang3 12" member Donating Members 2,107 Member For: 19y 11m 19d Location: Perth WA Posted 21/12/09 11:21 PM Share Posted 21/12/09 11:21 PM mmmmm bionic + argents + sh*tloads of kw/nm = yummo !!!! love the argent/bionic combo..good thread too BTW headsex! Link to comment https://www.fordxr6turbo.com/forum/topic/64265-haydns-rebuild/page/4/#findComment-965196 Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 8m 21d Gender: Male Location: Perth, WA Posted 22/12/09 12:25 AM Share Posted 22/12/09 12:25 AM Any chance of getting some more pics to show off the 20" argents? Link to comment https://www.fordxr6turbo.com/forum/topic/64265-haydns-rebuild/page/4/#findComment-965207 Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 11m 4d Gender: Male Location: OZ Posted 22/12/09 02:59 AM Share Posted 22/12/09 02:59 AM On 14/12/2009 at 10:28 AM, Headsex said: Ran the car up on the dyno today, It made 355rwkw straight off the bat. But I called the tuning off at this point as it had a horrible boost osilation which I wasn't going to waste dyno time on. Air fuels were pretty spot on what I'm commanding also. After a initial scare with the AFR's going leaner than commanded top end, I Put the wideband sensor in the dump, and it was more representative of the AFR's that were commanded.Suspect the rear muffler's causing some sort of reverberation of air when the airspeeds get up there.. It creates a awful whistle also to suggest that theory.This isn't an xforce 4" - 3.5" by any chance? Link to comment https://www.fordxr6turbo.com/forum/topic/64265-haydns-rebuild/page/4/#findComment-965234 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now