RAP1D Member Donating Members 3,739 Member For: 18y 10m 23d Gender: Male Location: Sydney NSW Posted 04/10/10 07:42 AM Share Posted 04/10/10 07:42 AM Good move, they come alive with a big turbo and supporting mods... no more running out of puff at 5 grand Link to comment https://www.fordxr6turbo.com/forum/topic/64192-wagnmans-silhouette-g6et/page/8/#findComment-1045067 Share on other sites More sharing options...
prudent Member 21 Member For: 15y 3m 27d Posted 27/10/10 01:03 PM Share Posted 27/10/10 01:03 PM On 04/10/2010 at 2:37 AM, wagnman said: Seriously though you can hear a "ting, ting, ting, ting" sound after you turn the engine off as the turbo is spinning down which does not sound like it will be too long before the thing sh*ts itself good and proper.Hey mate,My car did this when it had the timing cover oil leak.Noise went away after it was fixed.Nevertheless its a good excuse to tell the missus the turbo is kaput and you need a new bigger one :DKeep us posted on how you go. Link to comment https://www.fordxr6turbo.com/forum/topic/64192-wagnmans-silhouette-g6et/page/8/#findComment-1051003 Share on other sites More sharing options...
wagnman Member 567 Member For: 15y 9m 21d Posted 28/10/10 02:53 AM Author Share Posted 28/10/10 02:53 AM (edited) Timing cover leak hey? that's sounds interesting although the noise is most definately coning from the turbo and getting a little louder.Oil leaks on these things are bizare to say the least! My car had the common timing cover leak for about 7000km's and then it stopped, it also had a leak from the front of the rocker cover which stopped as well, a mechanic I talked to recently said that it could have been a case of the gaskets are now sealing better after getting oil soaked and swelling a little, who knows but at least it does not leak any more lol.Full turbo upgrade is on the way soon still, willl be done before christmas so watch this space. Edited 28/10/10 02:54 AM by wagnman Link to comment https://www.fordxr6turbo.com/forum/topic/64192-wagnmans-silhouette-g6et/page/8/#findComment-1051106 Share on other sites More sharing options...
Johnny G Team Grandpa Qualified Donating Members 809 Member For: 20y 1m 29d Gender: Male Location: Brisbane North. Posted 29/10/10 10:40 AM Share Posted 29/10/10 10:40 AM Good news mate - hope it all goes well! Keep us POSTED!!! Link to comment https://www.fordxr6turbo.com/forum/topic/64192-wagnmans-silhouette-g6et/page/8/#findComment-1051445 Share on other sites More sharing options...
wagnman Member 567 Member For: 15y 9m 21d Posted 19/11/10 01:16 PM Author Share Posted 19/11/10 01:16 PM (edited) Process West surge tank arrived from HIRO Performance, god dam! it's bloody lovely! Shame you cant see it much once it's fitted, but we know it's there.Just ordered the following goodies today....(Thanks for the service and advice Karl, HIRO Performance is second to none).Process West air box and 4 inch intake pipe work kit.Rapid Systems Battery relocation kit.Atomic valve springs.Atomic Harmonic Balancer.XSpurt 1000cc Injectors.Turbo on order within the next two weeks.THE WAIT IS KILLEN ME!!! Edited 19/11/10 01:16 PM by wagnman Link to comment https://www.fordxr6turbo.com/forum/topic/64192-wagnmans-silhouette-g6et/page/8/#findComment-1057134 Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 10m 17d Gender: Male Location: Melbourne Posted 19/11/10 01:32 PM Share Posted 19/11/10 01:32 PM What turbo did you go with mate? Link to comment https://www.fordxr6turbo.com/forum/topic/64192-wagnmans-silhouette-g6et/page/8/#findComment-1057139 Share on other sites More sharing options...
wagnman Member 567 Member For: 15y 9m 21d Posted 20/11/10 05:18 AM Author Share Posted 20/11/10 05:18 AM Im going to go for a common conversion that alot of guys like me have doen that want to keep their std exhaust manifold and existign dump pipe etc. It'll be a brand new FG F6 turbo hybridised (? lol) with the TO4Z front and comp wheel etc. Should be a good thing from as far as I can tell and deliver the kind of power / rev range that I am chasing.The next step up from this seems to be fairly major as you have to go an external waste gate turbo, custom exhaust manifold, new exhaust biger cooler, etc etc and really would require a built bottom end for any kind of reliability.cheers Link to comment https://www.fordxr6turbo.com/forum/topic/64192-wagnmans-silhouette-g6et/page/8/#findComment-1057246 Share on other sites More sharing options...
stick Member 23 Member For: 15y 2d Posted 21/11/10 09:40 PM Share Posted 21/11/10 09:40 PM Im coming for a drive! I thought your car was fast before! Have to catch up, I couldnt be happier with my goodies! Sounds like a JET!STICKZ Link to comment https://www.fordxr6turbo.com/forum/topic/64192-wagnmans-silhouette-g6et/page/8/#findComment-1057595 Share on other sites More sharing options...
wagnman Member 567 Member For: 15y 9m 21d Posted 22/11/10 10:30 PM Author Share Posted 22/11/10 10:30 PM (edited) LOL yeh any time stick, but beware that it may cost ya! You'll want more and more power too like me, enough is never enough.The power bug's a hard adiction to ignore. Edited 22/11/10 10:31 PM by wagnman Link to comment https://www.fordxr6turbo.com/forum/topic/64192-wagnmans-silhouette-g6et/page/8/#findComment-1057886 Share on other sites More sharing options...
stick Member 23 Member For: 15y 2d Posted 23/11/10 09:16 AM Share Posted 23/11/10 09:16 AM Its already started! I only wanted an exhaust! You only live once, so may aswell enjoy it while im here! Keep us posted on your progress! Link to comment https://www.fordxr6turbo.com/forum/topic/64192-wagnmans-silhouette-g6et/page/8/#findComment-1057990 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now