Jump to content

Rear Suspension "Bang"


Rudiger

Recommended Posts

  • All round good guy!
  • Lifetime Members
  • Member For: 16y 10m 2d
  • Gender: Male
  • Location: Greenvale, Victoria

Theres some good ones there actually.

Shocks and springs not an issue. Happened before new ones. Pissed the spare wheel thing out months ago.

Bearings are interensting, but I reckon we can discount those in this case.

Rear sways..I had the link changed when the shocks were done. Its now a Wholesale Suspeniosn ball joint thingy. The sway are pedders and they bloody creak like buggary. But this aint the noise.

I actually though it might be the inners not the outers but then what do I know. When they drop the cradle I'm insisting they swap andif it still makes the noise you will hear me go off from the other side of Melb and I'll get a nice weekend drive to Penrith to see Pat.

Link to comment
Share on other sites

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

  • Damn You's A Sexy Chich
  • Member
  • Member For: 17y 24d
  • Gender: Male
  • Location: Your House

If it makes you feel any better, mine has pretty much the EXACT issue, I'm hoping to get it sorted asap, as its now for sale, and I dont really want to be explaining to someone "that noise is probably just a bush" I'll probably get someone to check it out, coz to be honest CBF looking for it myself at the moment. (Pat be warned, shut the shop and the blinds, you'll be getting a visit soon I think)

Link to comment
Share on other sites

  • All round good guy!
  • Lifetime Members
  • Member For: 16y 10m 2d
  • Gender: Male
  • Location: Greenvale, Victoria

See. Its not just me. And my daughter says I'm making up stuff. He he (says he dancing around the room like a looney). I'm not going bonkers.

Ok Heres the deal. I spoke to the workshop foreman on Friday about a quote to do the bushes. For the outers he quoted $240 while the cradle was out but he said 2 but there is 3 to be done so I'll get that updated Tuesday. I'll do the outers and if its still there when I get the car back, well we know its not the outers. An expnsive exercise maybe but I'm at the point where I DON'T CARE.

Think of the most annoying thing in your life and your about where I am. My greatsest pelasure, (well one of them ) is driving my car and it is ruined by this bang in the back.

Anyway, if you dont like Deisel Geminis, Honda Accord Euro Drivers, or my ex wifes boyfriend then you are on my wavelength. If you like those things, especially the last one, I will see to it you are ejected from this forum for having really, really bad taste.

Now leave me ne. I feel about as stable as a Nuclear Power plant with Ray Charles at the controls.

Link to comment
Share on other sites

  • All round good guy!
  • Lifetime Members
  • Member For: 16y 10m 2d
  • Gender: Male
  • Location: Greenvale, Victoria

my noise only started after ford replaced the diff bush underwarranty, took it back complaining and they couldn't find anything

that's interesting.

Means it is something possibly not tightened properly that must have been lossened when they dropped the cradle. Well my thought anyway.

Link to comment
Share on other sites

  • 8 months later...
  • All round good guy!
  • Lifetime Members
  • Member For: 16y 10m 2d
  • Gender: Male
  • Location: Greenvale, Victoria

Been sitting on this for a while and may have a certain solution.

Developed a worse knock in the rear last week. Thought the wheels were going to come off.

Now my car has rear Pedders sway bar with specialist linkages from Wholesale Suspension. These are a ball joint type of thing to replace the standard linkage.

I called Pat (senna-t) who is my suspension Guru. After discussing I jacked the car up and went to it with a rubber mallet to see if anything was loose. Nothing. then I realised that with the body jacked up the sway is under tension. So lowered the car and shimmied under the rear and banged again and there ya go the driver side linkage was loose.

Removed the sway completely and lubed it and re fitted and tightened all bolts.

All bangs are gone.

So to cut a liong story short, if you have an unknown bang in the rear, could be loose sway bar. Worth a thought as I don't think anyone suggested that.

:beerchug:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
  • Create New...
'