How To Make My Car Dose?

[IBTZNU]

What do I do to make my car dose??

I have an FORD FG XR6 TURBO

Thanks

[XF Falcon]

Paint the car taxi yellow and stick a VL Turbo badge onto it, that should do it! :D

But seriously, I think all you need to do is block up your BOV, and stick a 'dose pipe' on the front of your turbo, which is basically a short pipe with a 90 degree bend on it, and a pod filter at the end of it

[SIKXE8]

3" 90 degree bend of the mouth of the turbo, also block of the BOV

not enough xr6's dose now days

[RSK]

You need to fit a pigeon between your turbo and air filter, somehow like this:

Goodluck

[Rhino1980]

Uhuhuhuhuh

[Shark]

3" 90 degree bend of the mouth of the turbo, also block of the BOV

not enough xr6's dose now days

sometimes its tuff .. but .. only VLs should be pigeon dosing

[turbo.vixen]

hahaha that pic is piss funny

[Dillz]

Block the return line and chuck something on it like a chair stopper with a small hole in it or a small oil breather.

Or if your not a cheap *beep* by a aftermarket bov and put it on, it looks to be piss easy with the FG's.

Oh and that's for Ptchhh sound not so much turkey gobble.

Heres one I prepared earlier. It's on a Ba but you won't even need to take the cross over off just do the last bit.

Edited 09/12/09 12:18 PM by Dillz

[IBTZNU]

Thanks guys!!!!!!

[Benji_vs]

Or you could do this

Classic!

Edited 16/12/09 10:33 PM by Benji_vs