Boost Guage Hookup

[pommie_shawn]

Hi guys .. got my boost guage all done apart from the vac line .. where do I hook that to ?.. and pics would be apreciated ..

Thanks Shawn

[pommie_shawn]

its ok sorted ...

But my AFR has lights but they at teh left (Lean) and dont go anywhere else....

Shawn

[Jafxr6t]

Sounds like you dont have the sender wire hooked up properly. pretty sure it goes on the sensor on the exhaust. Grey wire (BA) blue wire(BF). dont quote me on that.

[scorsto]

  On 28/11/2009 at 1:13 PM, pommie_shawn said:

Hi guys .. got my boost guage all done apart from the vac line .. where do I hook that to ?.. and pics would be apreciated ..

Thanks Shawn

Hi Shawn I am doing my mechanical boost gauge this avo where did you go through the firewall with the vac line?

Thanks Scorsto

[RowdyBurns]

There is a rubber gromit in the passenger footwell, it's on the right hand side just above the carpet. I went through there, it comes out just under the vacuum line you need to tap into.

If you are using an autometer gauge scrap the plastic t-piece that comes with it and get a brass one from Repco/Bursons etc, shouldnt be more than about $5.

[pommie_shawn]

Hi Scorsto

As Neesis said that was teh best place I found

Jafxr6t

will try the other wire and see what happens

Shawn