power_slide Hitting the apex Donating Members 596 Member For: 16y 1m 13d Gender: Male Location: Miranda Posted 24/11/09 11:03 AM Share Posted 24/11/09 11:03 AM Hey GuysI just got the BF ute back from Pulse Racing and I am very happy with their work. this is what I have had done Big Mouth air intakeBosch green tops 42lbWalbro Fuel pump4" Stainless exhaustCustom tune330rwkwim looking for any other power house mods that are good value for moneyIf not I want to work on making the thing corner Any thoughts?Cheers Link to comment Share on other sites More sharing options...
SLYF6 Member 9 Member For: 15y 6m 9d Gender: Male Location: Melbourne Posted 24/11/09 01:48 PM Share Posted 24/11/09 01:48 PM What boost are you running for this great RWKW NUMBER and are you still running the stock cooler?Are the valve springs handling the boost? Maybe if your looking for value for money you should look at doing things on the safe not sorry side.A cooler will help the life and power of the engine (Plazaman or a like, Not just cheap Crap). P.S. is it a Mk 1 or 2 (06/06 On I think?) anyway good luck with it Link to comment Share on other sites More sharing options...
XF Falcon <put funny sh*t here> Member 3,365 Member For: 18y 23d Gender: Male Location: Perth, NOR Posted 24/11/09 01:55 PM Share Posted 24/11/09 01:55 PM Nice figures for such little mods. I had the same power with siemen deka injectors, walbro pump, full plazmaman 1000HP kit (cooler, plenum..etc), ported turbo + 12psi actuator, and a few other little things (almost stock exhaust though). Was running about 14-15psi tune.As mentioned above, what boost are u running? Link to comment Share on other sites More sharing options...
power_slide Hitting the apex Donating Members 596 Member For: 16y 1m 13d Gender: Male Location: Miranda Posted 25/11/09 08:26 AM Author Share Posted 25/11/09 08:26 AM The boos it at 14.5 and its on the stock coolerThe valve springs seem to be fine and no problems have shown so farIts a BF Mk2I have scanned the dyno graphI have had a look at intercoolers but cant decide how far I need to go, I dont want to spent too much unless needed... what cooler would be best suited for my boost? Link to comment Share on other sites More sharing options...
sexual harrassment panda I see a red door and I want to paint it black Donating Members 5,919 Member For: 15y 1m 6d Gender: Male Location: Far north queensland Posted 25/11/09 07:43 PM Share Posted 25/11/09 07:43 PM a few sponsors make intercoolers to fit standard piping if you want - approx $1000or a full piping kit and cooler would be closer to $2000 Link to comment Share on other sites More sharing options...
SLYF6 Member 9 Member For: 15y 6m 9d Gender: Male Location: Melbourne Posted 25/11/09 11:11 PM Share Posted 25/11/09 11:11 PM (edited) That's a good looking graph. I though you would be running alot more boost to get that result( nice work).The next question is how much power want, need or other wise. I like the Plazmaman product, alot of my mate run these kits and get awesome result run after run.Do you want to run the big mouth kit still? If so I would try maybe plazmaman kit FF3(seen a mates car run 360- 370 with this kit). The other thing is do you want it to look stock or all Blinged up? Edited 25/11/09 11:20 PM by SLYF6 Link to comment Share on other sites More sharing options...
our06t Mmmmm......BOOST Member 3,135 Member For: 17y 7m 3d Gender: Male Location: central coast Posted 26/11/09 12:32 AM Share Posted 26/11/09 12:32 AM process west stg1 with under battery pipe would be perfect for what you have now , but if you want to go further with more mods and power you will need to look at some of the kits with piping etc Link to comment Share on other sites More sharing options...
power_slide Hitting the apex Donating Members 596 Member For: 16y 1m 13d Gender: Male Location: Miranda Posted 26/11/09 08:37 AM Author Share Posted 26/11/09 08:37 AM That's a good looking graph. I though you would be running alot more boost to get that result( nice work).The next question is how much power want, need or other wise. I like the Plazmaman product, alot of my mate run these kits and get awesome result run after run.Do you want to run the big mouth kit still? If so I would try maybe plazmaman kit FF3(seen a mates car run 360- 370 with this kit). The other thing is do you want it to look stock or all Blinged up?At the moment I am happy with the power, if I could get another 40rwkw for under 2g I would do it but if it costs more then I am probly going to start work on brakes and suspension Link to comment Share on other sites More sharing options...
power_slide Hitting the apex Donating Members 596 Member For: 16y 1m 13d Gender: Male Location: Miranda Posted 26/11/09 08:40 AM Author Share Posted 26/11/09 08:40 AM process west stg1 with under battery pipe would be perfect for what you have now , but if you want to go further with more mods and power you will need to look at some of the kits with piping etchow much would a process west stage 1 be worth fitted? Link to comment Share on other sites More sharing options...
Panda Eyes flame magnet Gold Donating Members 5,674 Member For: 16y 6m 15d Gender: Male Location: adelaide hills- 'race air' central Posted 26/11/09 08:04 PM Share Posted 26/11/09 08:04 PM I like the rapid systems- v 3.0 is killa....check the site sponsors area for links to products/ prices Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now