Mitchy_G Umm... Member 176 Member For: 21y 6m 2d Location: North Lake Macquarie NSW Posted 10/01/04 01:02 PM Share Posted 10/01/04 01:02 PM Stunner,Im running on just pure research, no testing. The SCART cable im not 100% on, because im not sure how it pugs into the xbox. I would think getting a scart extension cable and lopping and end off would do the trick, as it would be able to fit the plug needed for the ICC and carry the sound signals up to the stereo aswell. But as with my plans at the moment im not 100 percent. ill keep you posted!Mitch Link to comment Share on other sites More sharing options...
aaronmihe Upstanding Member Member 759 Member For: 21y 2m 23d Location: Canberra - ACT Posted 11/01/04 12:05 AM Share Posted 11/01/04 12:05 AM Wait a bit - everything is at a very very early stage of DIY development. If you're not a full on techo-geek prepared to blow things up this is NOT the time to get involved. *grins* Once things are more tested, and more fully documented will be safer....I'll try and post up some pics over the next week showing the xbox setup. (keeping in mind I haven't plumbed the box permanently into the car yet)A. Link to comment Share on other sites More sharing options...
Blueprint Stunner Member 25 Member For: 21y 11m 24d Posted 01/02/04 01:26 PM Share Posted 01/02/04 01:26 PM Hi Aaron, I was wondering what progress you have made for the Xbox mod. I already have a mod chip in my xbox and the relevant software running. I just need to know how to get the video hooked up through the ICC? Have you had this successfully running yet and if so can you post a detailed description of the steps you took to complete this mod? Much appreciated. Thanks Link to comment Share on other sites More sharing options...
turbocorty Donating Members 178 Member For: 21y 1m 29d Gender: Male Location: Melbourne Posted 01/02/04 01:48 PM Share Posted 01/02/04 01:48 PM FYI..Pinout description for input plug located uder audio unit.Pin No 1..RED Signal2..Green Signal3..Display switch - ground to activate6..Blue signal7..GND8..Sync9..Shield10..IR outputThis is all the information you should need to get going..The sync is negative pulse.Cheers! Link to comment Share on other sites More sharing options...
aaronmihe Upstanding Member Member 759 Member For: 21y 2m 23d Location: Canberra - ACT Posted 02/02/04 02:01 AM Share Posted 02/02/04 02:01 AM *nods* It's all explained in the Ford-Mods threads. Xbox RGB cables (asuming you get the 'right' one - work fine I've been static on development in this area while I design/source parts for the new power supply unit to run the xbox off 12v without inverters and the like. Also doing it in a manner that survives crank (when battery voltage drops to potentially about 8v)....I may do the screen stuff over the next couple of weeks just so the wiring is in place in the car - once I choose the final mounting location etc etcA. Link to comment Share on other sites More sharing options...
Lumpen Poison Fish. Poison Fish. TASTY FISH!!! Donating Members 5,181 Member For: 21y 8m 12d Gender: Male Location: The Bogan Shire Posted 02/02/04 04:30 AM Share Posted 02/02/04 04:30 AM Well, I dont know if this is pertinent or along what you guys are doing but I just fluked this site out of google while trying to find the "Advanced Auto Electronics" website or something...http://www.theage.com.au/articles/2003/10/...l?from=storyrhsPS:If anybody knows the site im talking about can you please post or PM me, im wanting to design a few different Sub boxes based around the Digital Designs 9500 series.... Link to comment Share on other sites More sharing options...
aaronmihe Upstanding Member Member 759 Member For: 21y 2m 23d Location: Canberra - ACT Posted 02/02/04 05:43 AM Share Posted 02/02/04 05:43 AM *laughs* Yeah one of my friends is also mentioned and quoted in the article A. Link to comment Share on other sites More sharing options...
Blueprint Stunner Member 25 Member For: 21y 11m 24d Posted 02/02/04 08:52 AM Share Posted 02/02/04 08:52 AM aaron can you direct me to the appropraite thread on the fordmods site? also if the information I require is not there, I really need someone to explain it better, I dont really udnerstand what the cable I need looks like, so maybe if someone could post me a pic of it (from both ends) it would help, then I could figure out the rest. Link to comment Share on other sites More sharing options...
aaronmihe Upstanding Member Member 759 Member For: 21y 2m 23d Location: Canberra - ACT Posted 02/02/04 09:07 AM Share Posted 02/02/04 09:07 AM Just pop over to FordMods, do a search on eithe rmy username (Aaron) or on "sync combiner" That should get you in the right threads.A. Link to comment Share on other sites More sharing options...
Blueprint Stunner Member 25 Member For: 21y 11m 24d Posted 02/02/04 09:22 AM Share Posted 02/02/04 09:22 AM ok thanks aaron, but you wouldnt happen to have a pic or a hyperlink for that cable I need cos I have no idea what it looks like or where to get it? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now