Jump to content

Recommended Posts

  • Forged Member
  • Lifetime Members
  • Member For: 18y 3m
  • Gender: Male
  • Location: SW Sydney

Has it been sitting there sealed or out in the open? If it has been sealed it should be relatively ok, maybe just put a few drops of engine oil down the oil inlet and rotate the compressor slowly - this may free up and dirt and grime inside...

  • Member
  • Member For: 16y 6m 19d

Vacuum out the spider webs drip a little oil in as mentioned and sweet as. Give it a spine and listen for any grinding. Unless the housings are at the right angles for the manifold and pipe work you will have to undo the bolts and shift the housing. You will see if it is clean then.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'