bjc Donating Members 2,823 Member For: 21y 3m 7d Gender: Male Location: Townsville Posted 31/01/10 02:30 PM Share Posted 31/01/10 02:30 PM Can you take some photos of the porting on the exhaust side (rounding it off) when you do it? I am going to make mine larger like Dave recommends but stick with the standard flapper.He explained it all well enough but would like some photos as to what it may look like! Link to comment Share on other sites More sharing options...
icer Banned 2,335 Member For: 15y 4m 24d Gender: Male Location: Aspendale, Vic. Posted 31/01/10 03:12 PM Share Posted 31/01/10 03:12 PM yeah go avo and get whats needed. let em know I sent you down and they will look after ya really good! Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 14d Gender: Male Location: @ my laptop Posted 31/01/10 11:34 PM Share Posted 31/01/10 11:34 PM We keep 38mm flappers in stock and can do them for $50 for forum members, we can also organize postage/freight if required Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 6m 16d Gender: Male Location: Central Queensland Posted 01/02/10 08:23 AM Author Share Posted 01/02/10 08:23 AM Thank you for the offer Ratter. Unfortunately I ordered it and a new sleeve for the wastegate shaft today as it was damaged (Broke) when it was removed.. The housing will be getting bored out as soon as I can get to the machine shop. Then the porting will begin. I will post up some pics as it progresses.. Link to comment Share on other sites More sharing options...
mattyb Donating Members 1,097 Member For: 16y 5m 27d Gender: Male Location: Gold Coast, QLD Posted 02/02/10 03:18 AM Share Posted 02/02/10 03:18 AM who are you getting to do it? Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 6m 16d Gender: Male Location: Central Queensland Posted 02/02/10 08:34 AM Author Share Posted 02/02/10 08:34 AM I am getting a local machine shop (Ruskins) to bore the wastgate hole. I will be porting the housing myself... Parts should be here tomorrow hopefully... Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 14d Gender: Male Location: @ my laptop Posted 02/02/10 08:41 AM Share Posted 02/02/10 08:41 AM do not just get a round hole, it can cause issues with the flapper jamming open partially Link to comment Share on other sites More sharing options...
mattyb Donating Members 1,097 Member For: 16y 5m 27d Gender: Male Location: Gold Coast, QLD Posted 02/02/10 09:32 AM Share Posted 02/02/10 09:32 AM (edited) Ratter, I'm in the same boat as HiPSI, looking to have this mod done, but am on a tight-ass budget. Can you elaborate on what is done with the port job and the larger diameter hole (you mentioned that it isn't round???). I was thinking of having my bored out to 38mm. Maybe porting as well. HiPSI, make sure you take plenty of piccys as I've got an idea of how to do this, but wanna make sure, cheers. Edited 02/02/10 09:37 AM by mattyb Link to comment Share on other sites More sharing options...
bjc Donating Members 2,823 Member For: 21y 3m 7d Gender: Male Location: Townsville Posted 02/02/10 10:25 AM Share Posted 02/02/10 10:25 AM Yes please elaborate on the not round hole thingy? Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 14d Gender: Male Location: @ my laptop Posted 02/02/10 10:27 AM Share Posted 02/02/10 10:27 AM Ratter, I'm in the same boat as HiPSI, looking to have this mod done, but am on a tight-ass budget. Can you elaborate on what is done with the port job and the larger diameter hole (you mentioned that it isn't round???). I was thinking of having my bored out to 38mm. Maybe porting as well. HiPSI, make sure you take plenty of piccys as I've got an idea of how to do this, but wanna make sure, cheers.A lot of people just make the hole bigger, a good port job is like getting a head ported, it's about contours etc to help the gas flow better, so more gas can flow out the same size hole for the same given amount of flapper opening. Normally only becomes a problem when a good exhaust and good flowing cooler are matched to a stronger actuator and higher power levels.Boring the hole round can cause the edge of the flapper to catch once it is made larger. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now